2) carbon fiber material
碳纤维材料
1.
Analysis on the advantages of carbon fiber materials in structural strengthening
碳纤维材料在结构加固中的优越性探析
2.
The thermal diffusivity of carbon fiber materials are measured by infrared imaging technology and reverse heat conductance method here.
研究结果表明,红外热成像技术可以方便、快速的测出碳纤维材料的导热性能,从而为这类材料导热性能的测量提供了一种新颖、可行的方法。
3) carbon fiber
碳纤维材料
1.
It is showed that the reinforcement of concrete members using carbon fiber sheets is simple,feasible,.
结合江口水电厂工程加固的实例,介绍了采用碳纤维材料进行加固需把握的性能特点及其施工工艺。
2.
Conclusion was gotten that the reinforcement using carbon fiber sheets was of the benefit that easy to construct,short construction period and good effect.
文章结合江口水电厂启闭机排架加固工程实例,介绍了采用碳纤维材料的加固方法、施工工艺及施工过程中的质量控制要点。
3.
Characteristics of reinforcement method with bonding carbon fiber and performance of carbon fiber are briefly introduced.
简述了粘贴碳纤维加固技术的特点及碳纤维材料的性能,介绍了碳纤维布在混凝土结构中的具体加固技术及关键控制要点,证明了碳纤维布的补强效果明显,具有较大的推广价值。
4) carbon fiber composite
碳纤维复合材料
1.
Study on properties of matrix resins and carbon fiber composites for resin transfer moulding;
一种适合于树脂传递模塑成型工艺的树脂基体及其碳纤维复合材料性能
2.
Numerical analysis of carbon fiber composite infrared nondestructive testing
碳纤维复合材料红外无损检测的数值分析
3.
Upon wide application of corrosion-resisting aluminum alloy and carbon fiber composite to aerospace industry,the contact between them is inevitable.
随着防锈铝和碳纤维复合材料在航空航天工业的广泛应用,它们间的接触不可避免。
5) CFRP
碳纤维复合材料
1.
Research on CFRP Outer-Tube of BESⅢ Drift Chamber;
北京正负电子对撞机(BEPC)BESⅢ漂移室碳纤维复合材料外筒的研制
2.
APPLICATION OF THERMAL EXPANSION TECHNOLOGY IN MOLDING OF CFRP;
热膨胀成型工艺应用于碳纤维复合材料
3.
Present situation of CFRP used in structure member strengthening;
碳纤维复合材料在结构加固中的应用现状
6) carbon fiber reinforced plastic
碳纤维复合材料
1.
Frequency spectral analysis for the ultrasonic attenuation of carbon fiber reinforced plastics;
碳纤维复合材料对超声衰减的频域分析
2.
Three types of carbon fiber reinforced plastic (CFRP) materials,T300/5222、T300/5405 and T300/QY8911 were used,electrically coupled to the aluminum alloys LY12CZ、7B04 and 2D70.
采用全浸腐蚀、腐蚀失重测量、电偶电位和电偶腐蚀电流等试验研究方法 ,将T30 0 / 5 2 2 2、T30 0 / 5 4 0 5和T30 0 /QY8911三种碳纤维复合材料与LY12CZ、7B0 4和 2D70三种铝合金相互偶接 ,研究由于电偶腐蚀的存在 ,对铝合金及复合材料腐蚀行为的影响 ,用SEM方法观察其腐蚀形貌 。
3.
In the process of carbon fiber reinforced plastic (CFRP), the optic fiber embedded in CFRP endures high pressure and temperature and shifts the optical performance of optic fiber.
在碳纤维复合材料结构的固化过程中 ,埋入其中的光纤将承受恶劣的环境 ,这将使光纤的光学性能发生变化 ,从而影响碳纤维智能复合材料结构中光纤传感系统的性能。
补充资料：聚丙烯腈碳纤维增强体(见聚丙烯腈碳纤维)
聚丙烯腈碳纤维增强体(见聚丙烯腈碳纤维)
carbon fibre reinforcements made of polyacrylonitrile
佩八饰”.限沂维用通体carbon fibre reinforce.ments made of polyaerylonitrile以聚丙烯睛纤维为原料制成的、角于复合材料中起承载增强作用和改善性能的碳纤维(见朵丙烯睛碳纤维).
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条