4) The web of the box-girder
箱梁腹板
1.
Through the comparison assay about the vertical prestressed steel wires and wire in the web of the box-girder,we research the rules of the two vertical prestressed steels and analyse the features and the prestress loss of the two different vertical prestressed systems.
通过对箱梁腹板竖向预应力钢绞线和精轧螺纹钢筋的对比试验,研究钢绞线和精轧螺纹钢筋竖向预应力规律,分析两种不同竖向预应力体系的特征和预应力损失,结果表明,钢绞线和精轧螺纹钢筋的第一次张拉预应力损失率和两者长期损失率基本相同,竖向预应力钢绞线的第二次张拉效果明显,预应力损失率较第一次张拉减小近1/2,对于控制主拉应力较大的高腹板的竖向预应力可靠度较大,反映了钢绞线作为竖向预应力筋的实际意义,为工程设计提供参考依据。
5) cracking in webs
腹板开裂
1.
Too much loss and uneven distribution of vertical prestressed are important reasons that cause cracking in webs of box beam bridges.
竖向预应力损失过大和分布不均是引起箱梁桥腹板开裂的重要原因。
6) web plates of box girders
箱形梁腹板
1.
The prosperous post buckling load capacity of web plates of box girders can be used.
:焊接箱形梁腹板存在较高的屈曲后强度 ,可供利用 。
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条