1) The curved thin-walled box-girder
曲箱梁
1.
The curved thin-walled box- girder bridges have been widely applied in recent years.
曲箱梁是近年来在桥梁中用的很多的一种结构形式,耗钢少而重量轻,抗扭性好。
2) curved box girder
曲线箱梁
1.
Analysis of shear lag and effect factors in curved box girder;
曲线箱梁剪力滞效应及其影响因素
2.
Effect of spatial prestressing for curved box girder bridges;
曲线箱梁桥空间预应力效应分析
3.
A dynamic model of curved box girder beam in highway interchanges;
立交桥曲线箱梁动力分析模型
3) box curved beam
箱形曲梁
1.
This paper makes the analysis and calculation of the stability of I-type curved beam and box curved beam, and simulates the working performances of the curved beams with two kinds of sections under the vertical even load along the full span.
对工字形和箱形曲梁进行了稳定分析计算,模拟了在满跨均布竖向荷载作用下两种截面曲梁的工作特性。
4) Curved box beam
曲线箱梁
1.
Based on the numerical results of model test, the distribution of transverse stress in flanges of curved box beam is presented in this paper.
通过对模型试验结果的分析 ,总结出了曲线箱梁横向应力的分布规律 。
2.
In the mechanical analysis of curved box beam, the shear - lag effect and the effect of curvature anus on the geometric properties of cross - section are considered.
在分析曲线箱梁力学性能时考虑了剪力滞效应，并且还考虑了曲车半径对箱梁截面特性的影响，推导了曲线箱梁在不同支承条件及载荷型式下的纵向剪切位移差公式。
5) thin-walled curved beam
薄壁曲箱梁
1.
On the basis of thin-walled curved beam theory and Umansckey s second theory,the one-dimensional discrete finite element equation and the corresponding structural model are established for the thin-walled curved box girders.
本文以薄壁曲梁理论、乌曼斯基第二理论为基础,推导了薄壁曲箱梁一维离散有限元方程,建立了相应的结构分析模型。
6) curved box girder
曲线箱梁桥
1.
Against the curved box girder bridges in highway bridges and urban viaducts,the curved grillage model of the multi-cells curved box girder is built in terms of the shear-flexible grillage method,and the analysis for the vehicle-bridge interaction is performed.
针对公路和城市立交中的曲线箱梁桥,基于剪力柔性梁格法建立了曲线箱梁的梁格模型,进行了车桥相互作用分析。
补充资料：ANSYS壳单元分析箱梁
! Analysis a box beam section with shell elements of ANSYS
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
! 用ansys的壳体单元分析箱梁
! Box dimension: 10*4*4m with shell thickness of 0.04m
! By Lu Xinzheng, Depart. Civil Engineering, Tsinghua University, Beijing
! 陆新征，清华大学土木系
! Aug. 2004
! Define the Element
! 定义单元
/PREP7
!*
ET,1,SHELL93
!*
! Define the section for shells
! 定义壳单元截面
R,1,.04, , , , , ,
!*
! Define the material
! 定义材料
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,200e9
MPDATA,PRXY,1,,.3
! Setup the model
! 建模
! Define the keypoints
! 定义关键点
k,1,0,0,0
k,2,4,0,0
k,3,4,4,0
k,4,0,4,0
! Define the lines
! 定义线
l,1,2
l,2,3
l,3,4
l,4,1
! Define the section area
! 定义截面
a,1,2,3,4
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条