1) plate heat exchanger test-bed
![点击朗读](/dictall/images/read.gif)
板式换热器试验台
2) plate heat exchanger
![点击朗读](/dictall/images/read.gif)
板式换热器
1.
Design of the Plate Heat Exchanger for Cooling Potassium Nitrate;
![点击朗读](/dictall/images/read.gif)
硝酸钾冷却用板式换热器的设计
2.
Measurement and analysis of plate heat exchanger gaskets in heating plant;
![点击朗读](/dictall/images/read.gif)
供热站板式换热器密封垫片检测与分析
3.
Research of automatic orientation fast clamping tool in plate welding of full-welded plate heat exchanger;
全焊式板式换热器板束焊接自定位快装夹具研制
3) plate type heat exchanger
![点击朗读](/dictall/images/read.gif)
板式换热器
1.
A comparision of the structure and performance of three heat exchangers —— shell-and-tupe heat exchanger、plate type heat exchanger and lamella heat exchanger is covducted in this paper.
文中对管壳式换热器、板式换热器和板壳式换热器从结构和性能方面进行了简单比较,结果表明:板壳式换热器结合了管壳式换热器高温高压和板式换热器结构紧凑及传热系数高等优点,更具应用前景。
2.
Computation methods for designing selection of plate type heat exchangers were studied.
![点击朗读](/dictall/images/read.gif)
研究了板式换热器的设计选型计算方法,建立了以冷热流体流速表征换热器传热系数与压降的模型,提出了一种基于上述模型的板式换热器选型计算方法,并使用通用的程序设计语言Delphi 7。
3.
Through selection of water-to-water heat exchanger for the closed circulating cooling water system,this paper discusses structural performances of shell-and-tube type heat exchangers,as well as plate type heat exchangers.
通过闭式循环冷却水系统中水-水换热器的选型,详细论述了管壳式与板式换热器的结构性能。
4) Plate Heat Exchangers
![点击朗读](/dictall/images/read.gif)
板式换热器
1.
Application of Imported Plate Heat Exchangers in Sulfitation Sugar Mill;
![点击朗读](/dictall/images/read.gif)
进口板式换热器在亚法糖厂的使用
2.
Application of Plate Heat Exchangers for Sulphuric Acid Scrubbing System;
![点击朗读](/dictall/images/read.gif)
板式换热器在硫酸净化系统中的应用
3.
Hydrodynamics and thermal characteristics of chevron-type plate heat exchangers
![点击朗读](/dictall/images/read.gif)
人字形波纹板式换热器性能数值模拟的研究
5) plate exchanger
![点击朗读](/dictall/images/read.gif)
板式换热器
1.
Discussion of heat exchange plate micro-distortion characteristics of plate exchanger
![点击朗读](/dictall/images/read.gif)
板式换热器换热板片微变形特性浅析
2.
There were an extensive application of plate exchanger in food industry.
![点击朗读](/dictall/images/read.gif)
板式换热器在食品工业中有着广泛应用。
3.
Selects high efficient plate exchangers to transfer quantity of heat, and uses automatic softener to softened water.
7/95 /70 -Y(Q)型带压锅炉 ,锅炉水系统采用循环水泵强制供水方式 ,选用高效的板式换热器换热及自动软水器软化水 ,并采用气压罐定压补水方式 ,系统实际运行表明该设计科学合理 ,简单可靠 ,安全有
6) performance test of heat exchanger
![点击朗读](/dictall/images/read.gif)
换热器换热性能试验
补充资料:板式换热器
用板材构成传热面的间壁式换热器。这类换热器结构紧凑,单位体积的传热面积较大。主要类型有:
① 螺旋板式换热器 由两张保持一定间距的平行金属板卷制而成(图1),冷、热流体分别在金属板两侧的螺旋形通道内流动。这种换热器的传热系数高(约比管壳式换热器高1~4倍),平均温度差大(因冷、热流体可作完全的逆流流动),流动阻力小,不易结垢;但维修困难。使用压力不超过2MPa。
② 平板式换热器 由一定形状的波纹薄板和密封垫片交互叠合,并用框架夹紧组装而成(图2)。冷、热流体分别在波纹板两侧的流道中流过,经板片进行换热。波纹板通常由厚度为0.5~3mm的不锈钢、铝、钛、钼等薄板冲制而成。平板式换热器的优点是传热系数高(约比管壳式换热器高2~4倍),容易拆洗,并可增减板片数以调整传热面积。操作压力通常不超过2MPa,操作温度不超过250℃。
③ 板翅式换热器 由封闭在带有冷、热流体进出口的集流箱中的换热板束构成。板束由平板和波纹翅片交互叠合,钎焊固定而成(图3)。冷、热流体流经平板两侧换热,翅片增加了传热面积,又促进了流体的湍动,并对设备有增强作用。板翅式换热器结构非常紧凑(换热面积达4400m2/m3),传热效果好,且使用压力可达15MPa。但它的制造工艺复杂,流道小,内漏不易修复,因而限用于清洁的无腐蚀性流体,如作空气分离用的换热器。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条