1) AZ31-0.25%Sb alloy
AZ31-0.25%Sb合金
2) AZ31 magnesium alloy
AZ31镁合金
1.
Quantitative relationship between secondary dendrite arm spacing and solidification cooling rate of AZ31 magnesium alloy;
AZ31镁合金的凝固冷却速率与二次枝晶间距的定量关系
2.
Effect of extrusion and annealing technology on microstructure and texture of AZ31 magnesium alloy;
挤出和退火工艺对AZ31镁合金组织和织构的影响
3.
Analysis of AZ31 magnesium alloy's mechanics properties on isothermal extrusion;
AZ31镁合金的等温挤压及其力学性能分析
3) AZ31 alloy
AZ31合金
1.
Effect of dysprosium on shape of β phase,homogenization treatment time and maximum reduction per rolling pass of AZ31 alloy
镝对AZ31合金β相形状、均质化处理时间及单道次最大轧制率的影响
2.
The flow stress behaviors of Mg-Al-Zn alloys(AZ31 alloy and AZ80 alloy) were studied by means of compression deformation tests on Gleeble 1 500 machines.
AZ31合金流变应力行为受变形温度影响:变形温度低于350℃时呈幂指数关系;高于350℃时呈指数关系,应力指数n为7,热变形激活能Q为112 kJ/mol。
3.
The results show that the Al_4Ce phase is formed after adding Ce element on the AZ31 alloy,which can strengthen the alloys and improve the microstructure as-annealed after rolling but not for as-cast.
在AZ31合金中添加0、0。
4) AZ31 Mg alloy
AZ31镁合金
1.
Phases analysis of twin-roll casting AZ31 Mg alloy plate blank
双辊铸轧AZ31镁合金板坯的物相分析
2.
Optical microscope and scanning electronic microscope ( SEM) were employed to observe the microstructure evolution and fracture behavior in superplastic deformation of AZ31 Mg alloy and the values of deformation activation energy at various.
通过热轧工艺制备了具有细晶微观组织的AZ31镁合金薄板。
3.
The warm deformation properties of hot-rolled AZ31 Mg alloy are examined by uniaxial tensile test at a temperature range of 50~250℃ and a strain rate range of 1.
4×10-1s-1的应变速率范围内通过单向拉伸试验检验了热轧AZ31镁合金的温变形性能。
5) magnesium alloy AZ31
镁合金AZ31
1.
The effects of load and wear time on the wear characteristics of magnesium alloy AZ31 were investigated in the dry sliding condition in the load range of 25N to 100N.
研究了滑动干摩擦条件下载荷和时间对镁合金AZ31磨损性能的影响。
6) Ni-P AZ31
镍磷合金AZ31
补充资料：(29H,31H-phthalocyaninato(2-)-N29,N30,N31,N32)copper
分子式：C32H16CuN8
分子量：576.08
CAS号：147-14-8
性质：熔点600°C (dec.)。水溶性<0.1 g/100 mL at 20°C。
分子量：576.08
CAS号：147-14-8
性质：熔点600°C (dec.)。水溶性<0.1 g/100 mL at 20°C。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条