1) Beam Images
纵梁图像
2) vertical beam
纵梁
1.
Nonlinear finite element analysis on bearing capacity of the vertical beam of large-scale electrical dust precipitator;
除尘器壳体纵梁承载性能的非线性分析
2.
The introduction of the vertical beam structure design and fuzzy optimization design is given as well.
研究了现用抽芯设备的优缺点,论述了抽芯工作台的结构与工作原理,介绍了纵梁的结构设计和模糊优化设计,结果表明,通过模糊优化设计可使纵梁的质量大为减轻。
3) longeron
[英]['lɔndʒərən] [美]['lɑndʒərən]
纵梁
1.
Finite Element Analysis of Left Main Longeron of Low Flat-bed Semi-trailer;
低货台半挂车右主纵梁有限元分析
2.
Automobile longeron and armed beam robot plasma cutting line;
汽车纵梁及加强梁机器人等离子切割生产线
4) longitudinal beam
纵梁
1.
The determination of the technological process for forming the longitudinal beam of the bus chassis was stated.
叙述了客车系列底盘纵梁成形工艺的确定过程 ,通过研究分析几种纵梁的相同点和不同点及左右纵梁对称等特点 ,制定了既能保证产品质量又能节约投资的工艺方案 ,并设计制造了适合系列产品快速开发的通用压形模。
2.
The cracked longitudinal beam of a coach was analysed by means of metallography and SEM .
用金相、扫描电镜等分析方法,对开裂的客车纵梁进行了分析。
3.
In the front collision of the car,the function of the longitudinal beam is very obvious.
在汽车的正面碰撞中,前纵梁的作用尤为明显,其设计的好坏直接影响汽车的碰撞性能。
5) carling
[英]['kɑ:liŋ] [美]['kɑrlɪŋ]
纵梁
1.
Simulation analysis of the lengthways warp of truck carling outside board;
卡车纵梁外板纵向翘曲的仿真分析
2.
The method of twice bending was introduced to control spring-back in high strength sheet metal carling.
分析了回弹机理以及U形件的成形特点,提出采用两次弯曲的办法来控制高强度板U形截面纵梁的回弹,利用有限元分析软件DYNAFORM进行了数值模拟,并且对两次弯曲法进行了实验验证。
3.
According to parts character, a pair of assembled punching, blanking compound die punching is designed, die structure is introduced, and assembled carling compound die structure is stated as well.
根据零件特点设计了一副组合式的冲孔、落料复合模冲压两种产品,介绍了模具结构,论述了组合式纵梁复合模的结构特点。
6) side rail
纵梁
1.
The two manufacturing technologies and correspondent selection of the side rail of heavy truck chassis;
重型商用车车架纵梁的两种制造技术及选择
2.
Due to the requirement of vehicle collision safety,the finite element model of vehicle s frontal side rail is set up and the collision dynamic analysis is carried out with the utilization of ANSYS/LS-DYNA.
针对汽车碰撞安全研究的需求,利用ANSYS软件建立了货车纵梁前部碰撞的有限元模型,并结合LS-DYNA软件进行了显式动力学碰撞分析。
补充资料：高光谱分辨率遥感图像及图像光谱信息提取
高光谱分辨率遥感图像及图像光谱信息提取
高光谱分辨率遥感图像及图像光谱信息提取 郑兰芬供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条