1) organic interlayer
有机过渡层
1.
The organic thin film/DLC hybrid films were fabricated on silicon substrates by FCVA and MW-ECRCVD so as to investigate the influence of organic interlayers, 3-Aminopropyl-triethoxysilane (APS) and N -[3-(Trimethoxysilyl)-propyl]diethylenetriamine (TA), on the mechanical properties of DLC films.
简要介绍了类金刚石薄膜(DLC)的分类、制备、性能及应用；叙述了有关磁过滤阴极弧沉积(FCVA)和微波电子回旋共振等离子体化学气相沉积(MW-ECRCVD)两种制备方法；用这两种镀膜方法制备有机薄膜／DLC复合薄膜，有机过渡层选用了两种，分别为3-Aminopropyl-triethoxysilane(APS)和N -[3-(Trimethoxysilyl)-propyl]diethylenetriamine(TA)。
2) Ti interlayer
钛过渡层
1.
Effect of Ti interlayer on thermal residual stresses of CVD diamond films;
钛过渡层对CVD金刚石膜热残余应力的影响
2.
Thermal stress distribution in film/substrate systems were calculated separately,one with Mo,W and Ni substrates and the other with Mo substrates with Ti interlayer.
分别计算了在常用金属材料钼、钨、镍作衬底和用镀有钛过渡层的钼作衬底的情况下,膜/衬底间的热应力分布情况。
3.
A type of composite substrate was explored to solve the problem of crack in the deposition of diamond films,that is,Mo substrates with Ti interlayer.
为了解决金刚石膜脱膜开裂的问题,尝试了一种复合衬底,即镀有钛过渡层的钼衬底。
3) Transition layer
过渡层
1.
Research of synthesizing PDC by using various transition layer materials;
采用过渡层合成金刚石复合片研究
2.
Transition Layer of Copper-cladding Aluminum in Continuous Casting;
连铸铜包铝复合棒坯过渡层的研究
3.
Interface structure and mechanical properties of FeNi alloy transition layer of composite pipes prepared by SHS;
SHS复合管FeNi合金过渡层接合界面结构及力学性能
4) transitional layer
过渡层
1.
Reflectance signatures of transitional layer and its tuning effects to the amplitudes of pulsating waves.;
过渡层反射特征及脉冲波的振幅调谐现象
2.
With the effect of spraying transitional layer, a stainless steel alloy layer was obtained on the magnesium based metal matrix composites by laser cladding.
利用中间过渡层的作用 ,在镁基金属复合材料上激光熔覆了不锈钢合金层 ,熔覆层与基体为冶金结合。
3.
Measures on resisting earthquake structure were proposed in setting of transitional layer,construction columns,earthquake resisting walls,forms and structure of earthquake resisting walls,and the design of gird beam of reinforced.
根据《建筑抗震设计规范》(GBJ11-89)中有关底层框架—抗震墙砖房的规定 ,从工程实用的角度出发 ,探讨了底部两层框架—抗震墙砖房的设计要点 ,并从过渡层楼板、构造柱的设置、抗震墙的设置、结构形式、抗震墙的构造、钢筋混凝土圈梁、过渡层外纵墙、上部承重砖墙等的构造设计方面提出了抗震构造措施。
5) buffer layer
过渡层
1.
Influence of Ni buffer layer on micro structure and giant magnetoresistance of Co/Cu/Co sandwiches;
Ni过渡层对Co/Cu/Co三明治膜微结构及巨磁电阻性能的影响
2.
GaAs epitaxial layer was charactorized by changing the growth temperature of GaAs buffer layer.
通过改变GaAs过渡层的生长温度对GaAs外延层进行了表征,利用扫描电镜(SEM)和X射线衍射仪研究了表面形貌和晶体质量,优化出满足高效太阳能电池要求的高质量GaAs单晶层生长条件。
3.
First, we deposited the buffer layer of MgB_ 2 with 10μm thick, then deposited the surface MgB_ 2 thick film layer with 20μm.
我们用混和物理化学气相沉积法(HPCVD)在不锈钢衬底上原位制备了以MgB2厚膜(约10微米厚)为过渡层的MgB2超导厚膜(约20微米厚)样品,两层膜总厚约30微米。
6) interlayer
['intə(:),leiə]
过渡层
1.
Interlayer Technology Between CVD Diamond Films and WC-Co Substrates;
CVD金刚石薄膜与硬质合金基体之间过渡层技术
2.
Effects of different substrates and interlayer bonding on residual stress field were investigated.
采用有限元方法分析氮铝钛涂层的残余热应力,研究不同的基体及过渡层对残余热应力分布的影响。
3.
Ceramic-lined composite steel pipe with an Al_2O_3 and FeAl_2O_4 ceramic layer was prepared by the self-propagating high-temperature synthesis method using MnO_2 powder as additive,and the effects of MnO_2 on the structure and mechanical proper- ties of the ceramic layer and interlayer were studied.
采用MnO_2作为添加剂自蔓延高温合成法制备了具有Al_2O_3和FeAl_2O_4陶瓷层的复合钢管,研究其对陶瓷层和过渡层的结构和性能的影响。
补充资料：有机覆层:有机覆层
在基体材料表面覆以有机材料的材料保护层。在机械製造中﹐有机覆层的绝大部分是涂装层﹐或称油漆层。此外﹐也有用橡胶或塑料作为覆层的。需要抗酸﹑硷和抗腐蚀性气体和液体的钢铁件﹐常用厚约 3毫米的橡胶(如氯丁橡胶)或塑料(如氯化亚乙烯共聚物)黏在表面﹐可长期保护基体不受腐蚀。这种覆层主要用在大型抗蚀容器或排气系统中。埋在土壤中的金属构件﹐常以聚乙烯带包裹保护。在喷鉬或喷不锈钢的表面上涂覆聚四氟乙烯﹐在150℃温度下摩擦係数很低﹐磨损轻微﹐适於製造低载荷和要求高度清洁的滑动轴承﹐或用在食品﹑精细包装和纺织机械上。各国的Du﹑Dx轴承都是以塑料与金属复合製成的。通过静电喷涂将环氧树脂﹑氯化聚醚﹑聚四氟乙烯以及聚氯乙烯等塑料粉末涂覆在金属表面﹐可获多种抗化学腐蚀性极好的覆层﹐可用於输水﹑污水处理和海洋平台的设备上。有机覆层在辉光放电情况下﹐有机单体可以聚合成无针孔的有机膜﹐用作电容器的介质层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条