说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> FLUENT数值分析
1)  FLUENT value analysis
FLUENT数值分析
2)  Fluent numerical simulation
Fluent数值模拟
3)  Fluent simulated analysis
Fluent仿真分析
4)  numerical analysis
数值分析
1.
Optimization design and numerical analysis of excavation and yield supporting for unstable surrounding rock;
不稳定围岩开挖与让压支护的优化设计及数值分析
2.
The numerical analysis for the assembly stress in the local short fault of a vessel girth joint;
压力容器环焊缝局部短错边装配应力数值分析
3.
Numerical Analysis of Effects of Phase Transformation Heat Changes on the Cooling Ability of Partial Die-casting Mould;
相变换热对压铸模具局部冷却能力影响的数值分析
5)  numerical simulation
数值分析
1.
Numerical Simulation on the Cooling Capacity of Partial Mould under Natural Condition;
自然冷却条件下压铸模具局部冷却能力的数值分析
2.
Base on the prior period study on the numerical simulation of Rheo-diecasting mould filling and solidification process of semisolid magnesium alloy about plate model.
在前期平板模型流变压铸充型凝固过程数值分析的基础上,利用所建立的数学模型对镁合金压铸件中间轴螺塞进行了数值分析和实验研究,对比分析了零件成形时镁合金牛顿流体与镁合金半固态流体的充型特征及零件中存在缺陷的位置和大小。
3.
In order to optimize the manufacturing procedure of the thick 7B04 aluminum alloy, numerical simulation method is employed to analyze the stress field of thick 7B04 aluminum alloy board during manufacturing procedure of quenching, calendaring and stretching.
为了优化7B04铝合金厚板生产过程,对7B04铝合金厚板生产过程中淬火、压光、拉伸过程应力场的变化和分布情况进行了数值分析。
6)  numerical value analysis
数值分析
1.
The surface vertical and horizontal displacements resulted from the mined-out pit are predicted by use of the FLAC software and the slope and curvature of surface sedimentation at every locus are figured out with numerical value analysis theory.
使用FLAC软件预测出采空区形成后引起的地表垂直和水平位移,然后使用数值分析方法,计算出地表各个沉降点的斜率和曲率,预测结果对矿山建设有参考作用。
2.
With the aid of the method of numerical value analysis,the node-matrix is used to find solution on a computer,thus providing a practical and reliable method to solve the hydraulics-calculation problem of the branch-shaped pipe-net.
用数值分析的方法,采用节点矩阵在计算机上求解,从而为解决支状管网水力计算问题提供了一种实用可靠的方法。
补充资料:边坡稳定分析数值法


边坡稳定分析数值法
numerical value method for slope stability analysis

  b IonPo Wend一ng fenx一shuzh{fo边坡稳定分析数值法(n urnerieal value me‘hodfor slope stability analysis)确定边坡岩体某一区域内全部质点在开挖前后的应力和位移的分布状态,据此分析边坡岩体变形发展过程及其破坏形态、范围和边坡稳定性的应力分析方法。数值分析方法多用于几何形状复杂的边坡。 数值法中广为采用的方法有:(1)有限单元法。它是将边坡岩体离散化,在考虑开挖步骤与岩体不连续面等因素变换成为有限个单元的集合,相邻单元被具有共同位移的节点连接,采用标准结构分析的处理方式后,求解线性方程组,最后求出各节点的应力与位移值进行边坡稳定性的分析。(2)边界元法。此法具有降维作用,它是对已知边界条件的某域,把基本支配方程转换成相应的边界积分方程,然后通过对边界的离散化,建立相应的代数方程组进行求解。(3)为解决边界效应、节省计算费用的有限元与无限元相结合的方法。(4)吸收两种方法优点的有限元与边界元祸合方法。(5)以分离的块体为出发点,根据牛顿运动定律,结合不同的本构关系,用动态松弛法按时步进行迭代求解的离散元法。由于它允许块体有较大位移,甚至可脱离母体自由下落,故可直观地反映滑坡过程及其破坏形态。 由于计算机与软件开发的迅速进展,各种数值方法已逐步代替了模型试验方法,尤其是光弹模型法已很少采用。 (于润坤)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条