1) Coupling Capacitance
耦合电容法
2) coupling
耦合
1.
Fluid-solid coupling analysis of high-pressure orifice choke valve.;
高压孔板式节流阀流固耦合分析
2.
Multiple-factor coupling of overpressure evolution in the Damintun Sag;
大民屯凹陷超压演化的多因素耦合
3.
Application of GIS coupling technology to comprehensive assessment of ecological riparian zone;
生态河岸带综合评价与GIS耦合研究
3) couple
耦合
1.
Influence of Distributed Delay on Turing Pattern Formation in Coupled Reaction Diffusion Systems;
耦合反应扩散体系中分布式延迟对图灵斑图的影响
2.
Rigid-body Element Analysis of Seepage Flow Field of Fissure Network coupled with Stress Field in Fissured Rock Masses;
裂隙岩体裂隙网络渗流场──应力场耦合的刚体元分析
3.
Control for Satellite Formation Flying with Coupled Translation and Attitude Dynamics;
相对位置和相对姿态耦合的编队控制
4) hybrid
耦合
1.
Study on separation of o-xylene and acetic acid by distillation-crystallization hybrid process;
蒸馏-结晶耦合分离乙酸-邻二甲苯的研究
2.
Mechanism of air pollution control by utilizing plasma-photocatalyst hybrid system was analyzed synthetically.
综合探讨了低温等离子体与光催化耦合这一新兴技术净化空气污染物的机理,讨论了影响耦合净化功能的主要因素以及臭氧的去除方法,介绍了该技术在去除挥发性有机物、氮氧化物、除菌等方面的研究现状,提出了其今后的研究方向。
3.
The paper reviewed the development of distillation-melt crystallization hybrid process.
简要叙述了精馏 -熔融结晶耦合工艺的原理与方法 ,并对国内外精馏 -熔融结晶耦合工艺的研究进展、过程开发及工业应用的现状作了介
5) coupled
耦合
1.
Development status of ethanol fermentation coupled with in situ product removal;
乙醇发酵在线分离产物耦合的研究现状
2.
Treatment of organic wastewater from tomato paste processing by coupled aerobic-anaerobic process;
好氧-厌氧耦合法处理番茄酱加工有机废水
3.
Coupled hydrological and hydraulic model considering structural measures for soil conservation;
考虑水土保持措施的水文水力耦合模型研究
6) interaction
耦合
1.
Research of Numerical Method on Railroad Tanker about Solid-fluid Interaction Problem;
铁路罐车液固耦合问题数值方法研究
2.
The vibration of every module has interaction,including fluidsolid caoupling of the blade.
叶轮机械的叶轮系统是典型的非线性多振子系统,其各组件的振动均具有耦合性包括叶片流固耦合。
3.
The vibration caused by wind is a critical reason that lead to the membrane structure break, and the study of the interaction between wind and membrane structure is one of hot and difficult subjects.
风振动是导致膜结构破坏的重要原因,对风-膜的耦合振动分析是膜结构研究的热点和难点之一,通常采用Newmark法和Newton-Raphson法编程求解。
参考词条
补充资料:可计算电容法绝对测定电容和电阻单位
可计算电容法绝对测定电容和电阻单位
determination of SI units of capacitance and resistance based on calculable capacitor method
式中c0二(。。‘l动InZ为一常数,。r为介质的相对介电常数,。。为真空介电常数,C;、矶又称交叉电容。图1任意形状导电柱的截面当c:一。时,上式可简化为“=专(c,+。)二c0[l·罕(瓮)2一罕‘箫)4·幂‘瓮,‘一“式中△C二C:一Q。当长度为L时,总电容最为 C二cL 0 c0L根据光速。二2卯7兑.458 kn甘。计算,常数C0二1.姑3 549以3 PFlm。 可计算电容的结构是用4根几乎相碰又彼此绝缘的金属圆柱组成一组电容,其外围包有一个接地屏蔽E。计算电容的横截面(图2),中间插人可动屏蔽电极,电极的位移用光学系统来测量。整个系统在真空中进行侧t。图2可计算电容的横截面 美国国家标准局研制的可计算电容的不确定度约为lxlo一;日本的约为2.5x10一7冲国的约为3.5x10一’,后经改进为l.oxlo一7(包含因子k=l)。 可计算电容绝对测量电阻的原理方框图见图3o所用计算电容为。.5pF(或l夕),首先在电容电桥上用1:2、l:ro的比率作4次或5次测量,以确定0.01口标准电容器的电容值。在电容电阻桥上用1:1的比率侧出1了n的交流标准电阻的电阻值。然后利用交流电阻电桥给出l护O或l护n的交流标准电阻的电阻值,并与一个特制的1护n或1护n的交直流转换电阻进行比较,以确定其交直流转换误差。直流测量过程在直流电桥上进行,将已确定交直流转换误差的1护n或l口n的交流标准电阻与国家电阻基准(In)进行比较。 目前用可计算电容法绝对测量电阻的不确定度已keiisuan dianrongfa luedui Ceding dian『以习he dianzudan勺切81可计算电容法绝对测定电容和电阻单位(ds-te们rrunation of 51 units of ca侧加i切叮ce and邢isteLnce场既don以c吐ab】e caPacifor meth记)可计算电容是横截面的尺寸无需测量,而只裕测定轴向长度即能确定电容大小的特殊电容器,它能被准确地测量,因而通过它可以确定电容和电阻单位的sI量值,也称作可计算电容法绝对测量电容和电阻单位。 可计算电容是基于1956年澳大利亚的A.M.汤普森和D.G.兰帕德证明的静电学新定理。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。