1) lag screw
拉力螺打
2) tension
拉力
1.
Calculation of tension acting on arbor in process of extruding aluminium alloy tube without lubrication;
铝合金管材无润滑挤压穿孔针拉力的计算
2.
Analysis of tension and displacement of geomembranes placed on landfill slopes;
垃圾填埋场边坡上土工膜的拉力与位移分析
3.
Study on Newton Iteration Method of Sketch and Tension of Suspension Rope;
牛顿迭代法悬索线形与拉力的研究
3) Pulling force
拉力
1.
Relationship between pulling force and major chemical components in flue-cured tobacco leaves;
烤烟拉力与主要化学成分的关系研究
2.
The extrusion length is mainly determined by arbor strength when aluminium alloy tube is extruded without lubrication based on the calculation of arbor′s pulling force.
根据对穿孔针所受拉力的计算 ,得出如何确定无润滑挤压铝合金管材时合理的铸锭长度 ,以减少挤压时的断针现象。
3.
The conclusion is obtained from the analysis and calculation on the forces encountered by the recoiling partition of guns during recoiling action that the pulling force produced by artificial recoiling oil cylinder can meet the requirement when the recuperator supplies the air at 8.
5MPa时,人工后坐油缸拉力能满足使用要求的结论。
4) pull
拉力
1.
According to the question texted such as awl head does deeline, one is drawn press the experiment in the pole and very beginning spiral shell of awl hole and concentric pull text of an axes of pole .
包括锥头偏斜杆件拉、压试验;锥头螺孔与杆件轴线不同心拉力试验等。
2.
The cement-mixed pile in composite soil nailing wall is helpful for the reductions of the horizontal deformation of deep excavation and the pull of soil nail.
结果表明,设置不同排数的搅拌桩对于复合土钉墙的受力机理、变形特性、土钉拉力大小及分布均有较大影响,1~2排搅拌桩较为合理,过多的搅拌桩排数可能会导致复合土钉墙出现重力式挡墙的受力、变形性态,增加上部土钉的拉力。
3.
In rectilinear motion,the extremum of pull(F)varies with the factor;angleθ=α=arctgμ(μ:friction factor;angleθ:the angle between the direction of pull and the motion direction).
在直线运动中拉力F的极值随摩擦系数 μ的变化而变化 ,当θ=α=arctgμ( μ为摩擦系数 ,θ角为拉力F和运动方向的夹角 )时 ,F有极小
5) tensile force
拉力
1.
It has close relation between broken pulling force of wire rope and tensile force value dispersed degree of steel wire for rope.
对国内 3家工厂和日本产 72A盘条进行试验并分析 ,钢丝绳的整绳破断拉力值和制绳钢丝拉力值的离散度有密切关系。
2.
According to feature of reinforced earth structures and experimental results, the authors apply mathematical statistics method to analyze physical and mechanic parameters of filling materials gravity(γ) and reinforced materials tensile force, and results show reasonability by engineering examples checking.
笔者针对加筋土结构本身的特点,结合试验结果,采用数理统计的方法,对加筋土填料(主要为砂卵石填料)的重度γ、加筋材料的拉力进行统计分析,并将其应用于工程可靠度验算,其结果表明是合理的,可为加筋土结构设计规范修订提供一定的参考。
6) pulling force
后拉力
1.
In order to obtain the stress distributing rules of the forming process of short plug drawing tube and the differences of drawing force,pulling force and dimension precision under different dies,FE method was used and FE model of the plug drawing tube under different dies was built.
为了获得不同的模具下短芯棒拔管成型过程中的应力分布规律以及不同模具对短芯棒拔管拔制力、芯棒后拉力和尺寸精度的影响规律,利用有限元的方法,建立了不同模具下短芯棒拔管成型的有限元模型。
参考词条
补充资料：HP-241B色带打码机/HP-30手动打码机
适用材料：
塑料薄膜PT、PE、PVC、OPP、KT、铝箔、饮料瓶商标；各种塑料复合材料、塑料袋、纸（不干胶、卡片）、皮革、布；包装容器袋、塑料制品；电子元件外壳。
工作原理及结构特点：
采用热打印带代替油墨打印，采取特殊的活字装卸换字结构，可在任何软包装材料上打印。印字清晰，不易擦掉；卫生干净，无油墨污染之优，是一种经济卫生的打印方式。
HP-241技术参数：
最高速度：70-120次/分 可调
打印间距：任意
打印行数：1-3行
电 压：220V±10% 50Hz
功 率：200W
热打印带宽度：25-35mm
HP-30技术参数：
电 源：220V/50Hz
功 率：≤40W
尺 寸：225×200×155mm
重 量：2.5kg
说明：补充资料仅用于学习参考，请勿用于其它任何用途。