1) adsorption capacities of saturation
饱和吸附容量
2) adsorption capacity
饱和吸附量
1.
H-acid adsorbed onto TiO_ 2 surface through one sulphonic group,which occupied less surface area leading to higher adsorption capacity, weaker adsorption bond, and less adsorption irreversibility.
5条件下,主要有一个磺酸基团解离,此时,H酸通过一个磺酸基团吸附在TiO2表面,占位小,饱和吸附量大,但吸附键较弱,吸附较可逆。
2.
The adsorption capacity Γmax,the saturated adsor-ption area Am,and the surfactant concentration needed in order to reduce surface tension by 20 mN/m(pc20) were calculated according to Gibbs ads.
根据Gibbs吸附公式求出饱和吸附量Γmax,饱和吸附面积Am。
3) saturation adsorption capacity
饱和吸附量
1.
The correlation between physicochemical properties of volatile organic compounds and saturation adsorption capacity of activated carbon was studied through the experiments of adsorbing toluene,p-xylene,methyl acetate,ethyl acetate,ethanol and propylalcohol on granular activated carbon kc-4.
0型颗粒活性炭对甲苯、对二甲苯、乙酸甲酯、乙酸乙酯、乙醇、正丙醇进行吸附实验,研究挥发性有机物的物化性质与活性炭饱和吸附量之间的相关性。
4) Saturated adsorption weight
饱和吸附量
1.
The relation between saturated adsorption weight,separation efficiency and electrostatic field intensity under uniform electrostatic field has been studied,and on the basis of which the satura ted adsorption weight and separation efficiency in the cylinder electrostatic field have been calcu lated, and compared satisfactorily with experimental data.
研究了均匀电场中的饱和吸附量、分离效率与电场强度的关系，并以此结果计算了圆柱形电场中的饱和吸附量和分离效率，与试验值进行了对比，获得了满意的结果。
5) saturated adsorption capacity
饱和吸附量
1.
the saturated adsorption capacity and the molecular sectional area of nbutyl alcoholwere presented automatically.
借助该软件和微机，采用人机对话输入原始实验数据，如正丁醇溶液的温度、浓度和表面张力等后，通过曲线拟合法，微机可自动输出正丁醇分子的饱和吸附量、分子截面积等实验结果。
6) static saturated adsorption capacity
静态饱和吸附量
1.
The static saturated adsorption capacity of the 5 A molecular sieves(bars) was(0.
采用水热法合成了用于分离石脑油中正构烷烃的粉状5A分子筛,经挤出成型,干燥,活化,得到条形5A分子筛,其n-C06,n-C07,n-C08静态饱和吸附量分别为0。
补充资料：吸附容量
分子式：
CAS号：
性质：即吸附量，在固定床吸附时，达到透过点时的透过容量为吸附容量。吸附装置的吸附容量指在一定的运转条件下(包括再生切换在内)的吸附量，由于吸附剂经多次使用后会发生劣化的现象，故设计吸附装置时，常采用运转条件下的吸附容量为设计吸附容量。
CAS号：
性质：即吸附量，在固定床吸附时，达到透过点时的透过容量为吸附容量。吸附装置的吸附容量指在一定的运转条件下(包括再生切换在内)的吸附量，由于吸附剂经多次使用后会发生劣化的现象，故设计吸附装置时，常采用运转条件下的吸附容量为设计吸附容量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条