1) high purity polycrystalline aluminum
高纯多晶铝
2) polycrystalline pure aluminum
多晶纯铝
1.
The vacancy defect clusters in polycrystalline pure aluminum induced by high-current pulsed electron beam
强流脉冲电子束辐照诱发多晶纯铝中的空位缺陷簇结构
2.
The internal friction(IF) and relative dynamic modulus in the polycrystalline pure aluminum(Al) were measured using a multifunction internal friction apparatus(MFIFA) at frequencies of 0.
0 Hz的条件下测定了多晶纯铝在25℃450℃升降温过程中的内耗峰值温度和相对动力学模量,并根据Arrhenius关系式计算了升降温过程中的扩散激活能和内耗行为特征。
3) high purity poly-silicon
高纯多晶硅
4) high purity aluminum
高纯铝
1.
Critical fracture behavior of high purity aluminum under impact loading;
动态拉伸加载下高纯铝破坏的临界行为
2.
Influence of surface indices of high purity aluminum crystals on initiation process of pit etching;
晶面指数对高纯铝表面腐蚀发孔的影响
3.
Influence of surface scratch on the pit etching of high purity aluminum
表面划痕对高纯铝腐蚀发孔的影响
5) high purity aluminum foil
高纯铝箔
1.
Effect of speed ratio on textures transformation in cross shear rolled high purity aluminum foils;
异步轧制速比对高纯铝箔织构转变的影响
2.
Study on the texture of high purity aluminum foil for electrolytic capacitor
电解电容器高压阳极用高纯铝箔织构研究
3.
The effect of annealing temperature on micro-orientation in cross shear rolled high purity aluminum foils was investigated by means of orientation distribution functions(ODFs).
应用取向分布函数研究和分析了退火对异步轧制高纯铝箔微取向的影响。
6) High-purity aluminium
高纯铝
1.
Determining the impurity element in high-purity aluminium by inductive coupled palsma-mass spectrometry method;
电感耦合等离子体质谱法测定高纯铝中杂质元素
2.
The formation and development of the recrystallized cubic texture of high-purity aluminium foils in the presence of different cold-rolling lubricants were studied and analysed using ODF and SEM-EBSD.
采用ODF分析法 (晶体取向分布函数法 )及SEM -EBSD(背散射电子衍射 )技术研究和分析了不同冷轧润滑剂下高纯铝再结晶立方织构的形成和发展 ,结果表明 ,采用机油和煤油作润滑剂冷轧高纯铝箔时 ,退火后再结晶织构都是由很强的Cube织构以及弱的R织构组成 ,但煤油润滑比机油润滑冷轧样品退火后获得强得多的立方织构。
3.
Simulating textures of two different cold rolling lubrication were compared with the experimented textures in high-purity aluminium and the result s are in satisfactory agreement with those experimental measured.
采用Taylor模型,考虑了轧制过程中摩擦因素的变化,对具有初始织构的高纯铝冷轧织构进行了模拟。
补充资料：多晶莫来石晶须(纤维)
分子式：
CAS号：
性质：莫来石相为主晶相的多晶纤维。化学成分为Al2O3 72％～77％，SiO222％～17％，B2O3 3％～5％，P2O51.5％～3.0％。纤维直径2～7μm，纤维长度20～125μm。使用温度1350℃。多采用溶胶-凝胶法制造。主要用作补强填料，也可作为轻质、隔热保温材料使用。
CAS号：
性质：莫来石相为主晶相的多晶纤维。化学成分为Al2O3 72％～77％，SiO222％～17％，B2O3 3％～5％，P2O51.5％～3.0％。纤维直径2～7μm，纤维长度20～125μm。使用温度1350℃。多采用溶胶-凝胶法制造。主要用作补强填料，也可作为轻质、隔热保温材料使用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条