1)  Decanter centrifuge
卧螺沉降式离心机
1.
Decanter centrifuge is a popular centrifuge in industry.
卧螺沉降式离心机是一种在工业中应用非常广泛的离心机，对卧螺沉降式离心机的研究是一项很有实际意义的工作。
2)  decanter centrifuge
卧螺机
1.
A screening study of some polyacrylamide for decanter centrifuge in residual sludge dewatering;
卧螺机污泥脱水中几种聚丙烯酰胺的筛选研究
3)  horizontal screw centrifuge
卧螺离心机
4)  horizontal decanter centrifuge
卧螺离心机
1.
The set-up of horizontal decanter centrifuge dewatering system and its integration characteristics were introduced.
介绍了卧螺离心机污泥脱水系统的组成及其整体集成性能,并结合调试和应用经验,对卧螺离心机设计选型中应注意的一些问题如工艺管线的布置、离心机处理能力的确定、离心机进泥浓度的确定、絮凝剂投加点的确定、配套液位测量仪表的选用等问题进行探讨,希望在污水处理厂在离心机的应用上取得更良好的效果。
2.
The main characteristics of horizontal decanter centrifuge and its application in dewatering of low-concentration municipal sludge have been described.
介绍了卧螺离心机的主要特点以及在低浓度市政污泥脱水中的应用,探讨了差转速、污泥浓度对泥饼含固率,絮凝剂用量对固相回收率的影响。
3.
The horizontal decanter centrifuge, a typical dual-rotor structure with very little rotating speed difference, is a kind of separation machinery with continuous operation, large scale of materials, powerful productivity and low labor intensity, so it has been widely used in almost every department of the national economy.
近年来，为了有效的提高卧螺离心机的分离效果和处理量，卧螺离心机向着大型化、高参数和大长径比方向发展的趋势非常明显，但是随着转速的提高、长径比的增大，卧螺离心机的转子动力特性会发生很大变化。
5)  decanter
卧螺离心机
1.
In October 2003,Xinjiang Oil Fields introduced the decanter and sludge-dewatering whole set equipment,to carry out the dewatering of oily sludge.
2003年10月新疆油田选用了卧螺离心机以及成套设备用于这种含油污泥脱水,经使用已获得了很好的效果,其固相回收率达99%以上。
2.
The control scheme with constant differential velocity & constant moment of decanters to overcome blockage likely occurring during the treatment of city sludge has been presented with automatic preparing and equipment for adding of flocculant.
介绍了采用恒差速恒力矩控制方案克服卧螺离心机处理城市污泥时容易产生的堵料问题,介绍了絮凝剂自动制备和添加装置。
3.
The configuration of AC inverter's drives based on the common DC bus for decanters has been presented.
介绍了卧螺离心机差转速自动控制共直流母线变频调速系统的结构,分析了工作原理和节能效果,介绍了直流母线的两种并接方法。
6)  Decanter Centrifuge
卧螺离心机
1.
Optimum Design of the Decanter Centrifuge Baskets Based on FEM;
基于有限元法的卧螺离心机转鼓优化设计
2.
The laser overlaying was adopted on the revoling working blades according to invalidation of the decanter centrifuge abrasion, the technique of obtaining the performance of well metallurgy bond and microstructure minute was researched.
根据卧螺离心机磨损失效的特点 ,提出在螺旋叶片工作面采用激光堆焊工艺 ,探索了合适的堆焊工艺 ,获得了与基体冶金结合、组织改变均匀细化的高性能堆焊层。
3.
In a decanter centrifuge, the screw conveyor is the key component whose structure, materials and parameters determine the throughput, separation efficiency and working life of the centrifuge.
螺旋输送器是卧螺离心机的主要部件，其结构、材料和参数不仅关系到离心机的生产能力和分离效果，而且还决定了卧螺离心机的使用寿命。
参考词条
补充资料：沉降式离心机
分子式：
分子量：
CAS号：

性质：根据操作原理分类的一类离心机。机中有一个无孔转鼓。操作时，利用滤浆内液体和固体的比重不同，滤渣沉积于鼓壁内面，液体从鼓边溢流至外壳，由导管排出。在离心分离结束后，如果需要，可进行洗涤，然后停 车并用人工或机械将滤渣卸出。用于不易过滤的和固液比重相差较大的滤浆。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。