1) the high-speed wire mill system
高线轧机系统
1.
The research object of this paper is the high-speed wire mill system in the iron making plant of Anyang I& S Co.
本课题以安钢炼轧厂高线轧机系统的状态监测与故障诊断系统的研发为背景，以系统规划、硬件选型、软件开发、安装调试到运行使用等研发工作为主要内容，主要完成了以下工作： 1、在安钢炼轧厂高线轧机在线监测系统的监控对象、性能要求和系统地硬件构成和软件开发等方面，充分调查目前的传感器及软件的技术水平，本着量力而行的原则，参照国内外相关设备的故障诊断的实践和指标，对轧机系统的状态监测与故障诊断系统进行了系统的规划。
2) high-speed wire mill
高线轧机
1.
The result shows that production of high strength screw bars is reasonable by the control rolling and control cooling process on high-speed wire mill with the capacity of low temperature rolling.
通过采用控轧控冷工艺，对在高线轧机上用普碳钢生产ＫＬ４００Ⅲ级螺纹钢筋进行探讨，经试轧，生产出Φ８ｍｍ的ＫＬ４００Ⅲ级螺纹钢筋。
2.
The two million tons high-speed wire mill in Beiying Steel Plant is designed to be high-single-line continuous high-speed wire rod mill.
北营钢厂200万t高线轧机设计为单线全连续式高速线材轧机,作为轧钢I类设备,安装精度要求高。
4) high speed wire mill
高速线材轧机
1.
In rolling production by high speed wire mill, tension condition between finish rolling mill and pinch roll could be controlled by use of selecting good groove shape and diameter of pinch roll,well pinch mode, and by adjustment on clearance and speed of the pinch rolls.
在高速线材轧机上 ,轧制不同规格的产品时 ,通过适当选择夹送辊的槽形及辊径、夹送方式 ,并对夹送辊辊缝、夹送辊速度等进行联合调整 ,可以保证精轧—夹送辊之间处于合适的张力控制状态 ,实现稳定轧制。
2.
Test of production of highCarbon steel by revolting furnaceLF furnacecontinuous casterhigh speed wire mill was done.
进行了转炉—精炼炉—连铸—高速线材轧机生产高碳钢盘条的生产试验，结果表明：所生产的６５钢质量较好，连铸坯表面质量较佳，经高速线材轧机轧成的盘卷，用作钢丝生产的原料时，其拉拔性能好、消耗低。
3.
The construction situation and development of high speed wire mill in our country are introduced.
介绍了我国高速线材轧机的建设和发展状况； 对引进新轧机的设备特点、引进二手设备的生产和改造情况及我国设计制造高速线材轧机技术水平不断提高的情况进行了较全面的分析和介绍， 并指出今后高速线材轧机应采用的几种新技术。
5) high-speed wire rod mill
高速线材轧机
1.
Current situation and prospect of products of high-speed wire rod mill of Baosteel;
宝钢高速线材轧机的产品现状及展望
2.
The structure selection and application of roller guide and guard units are introduced which are used in the high-speed wire rod mill in Anyang Iron & Steel Co.
介绍了安阳钢铁股份有限公司高速线材轧机滚动导卫装置的概况、结构选择和应用要点,同时介绍了关键工艺参数的设计方法。
3.
The choice,installation,cooling and cooling water quality requirement of carbide roll ring were introduced,which used in high-speed wire rod mill of Chongqing Iron and Steel Co.
介绍了重庆钢铁股份有限公司高速线材轧机硬质合金辊环的选择、安装、冷却以及其对水质的要求,并简要介绍了生产中轧槽轧制量的设定,以及轧槽的磨损与修复等。
6) high-speed rod-rolling mill
高速线材精轧机
1.
In this paper,a fault monitor approach for high-speed rod-rolling mill is realized by collecting and analyzing its fault signals and finding out its fault characteristic parameters with the theory of neural network.
在对高速线材精轧机常见故障分析研究的基础上,通过对设备振动信号的采集、处理和提取特征参数的方法,结合人工神经网络原理,对其故障进行智能监测与诊断。
补充资料：1700mm热轧宽带钢轧机精轧机组控制台(武汉钢铁公司)
1700mm热轧宽带钢轧机精轧机组控制台(武汉钢铁公司)
1700mm热轧宽带钢轧机精轧机组控制台(武汉钢铁公司)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条