1) flow and heat transfer of checker chamber
蓄热室内流动与传热过程
2) fluid flow and heat transfer
流动与传热
1.
A comparision between two general computer programs for two dimension fluid flow and heat transfer;
两个二维的流动与传热数值计算通过程序的比较
2.
Numerical simulation was given for the fluid flow and heat transfer in a closed two-phase thermosyphon,during which the whole heat pipe was considered as a combination of a liquid pool,the evaporation section and the condensation section.
对两相闭式热管内的流动与传热特性进行数值模拟。
3.
Motivated by issues from application and requirements in the future,some studies on high-order compact(HOC)finite difference(FD)approximations for fluid flow and heat transfer have been performed by the present authors team.
针对黏性不可压缩复杂流动与传热问题的数值模拟,开展了对流扩散问题的指数型高阶紧致差分方法和"导数型"紧致差分逼近的高阶组合格式的研究,建立了求解原始变量和涡量流函数形式的黏性不可压缩 Navier-Stokes 方程组,Navier-Stokes/Boussinesq 方程组等的高精度差分格式与算法,直接数值模拟了驱动方腔流、自然对流换热、双扩散对流、混合流体对流等复杂流动问题。
3) heat transfer and flow
传热与流动
1.
This paper mainly focus on the heat transfer and flow in float glass tanks,and the effect of doghouse width on the velocity,temperature field and refining quality.
研究了浮法玻璃熔窑内传热与流动以及投料池宽度变化对熔窑内流场、温度场和玻璃熔制质量的影响 ,采用了 SIMPL EC算法计算了温度和速度场 ,计算了不同投料池宽度下的熔制因子分布和滞留时间微分分布。
2.
The heat transfer and flow in the solar composite wall with porous absorber were studied in the paper.
针对接触型和分隔型多孔介质太阳能集热组合墙系统,分析了太阳辐射及环境温度变化时,组合墙内传热与流动变化。
4) flow and heat transfer
流动与传热
1.
which describe the fluid flow and heat transfer in the pool of the level twin-roll strip casting are computed through utilizing ANSYS software.
采用有限元法,用ANSYS软件计算并描述了水平式双辊铸轧铝薄带熔池内液态金属流动与传热的N S动量方程、能量方程及κε湍流双方程等。
2.
Based on the physical concept of porous media,steam flow and heat transfer in a double-pass condenser is being numerically simulated and analyzed.
采用多孔介质物理概念对1台双流程凝汽器的汽相流动与传热进行了数值计算与分析。
5) heat transfer and fluid flow
传热与流动
1.
New triangularization method for discretization planar domains for heat transfer and fluid flow simulation;
用于传热与流动数值计算的一种三角化剖分新方法
6) heat transfer
传热过程
1.
Optimization control problems in process of heat transfer;
传热过程中的某些优化控制问题
2.
The equilibrium water content of the solids for drying, the number of mass transfer units for gas absorption and mass flow rate for heat transfer system were obtained using MATLAB.
用MATLAB计算食品过程中的物料平衡含水量、气体吸收的传质单元数和传热过程的调节,研究基于MATLAB的非线性方程、非线性方程组的求解和数值积分功能的应用。
3.
Numerical equations were set up to calculate the heat transfer inside the heat exchanger.
有多种传热形式可以实现传热流体和石蜡间的传热过程,如石蜡位于管外的壳管式换热器[1-2]和螺旋盘管式换热器[3-4],石蜡和传热流体间隔排列的螺旋板式换热器[5],传热流体在球外流动、石蜡封装于球内的传热过程等[6-7]。
补充资料：蓄热式换热
分子式：
CAS号：
性质：工业中的换热方式之一。利用固体填充物贮蓄热量以达到换热目的。当气体通过时，根据气体的温度高于或低于填充物的温度，可将热量传给填充物或从填充物吸取热量。常用于冶金工业，也用于化学工业等。例如炼钢平炉和煤气炉常用来预热空气等。
CAS号：
性质：工业中的换热方式之一。利用固体填充物贮蓄热量以达到换热目的。当气体通过时，根据气体的温度高于或低于填充物的温度，可将热量传给填充物或从填充物吸取热量。常用于冶金工业，也用于化学工业等。例如炼钢平炉和煤气炉常用来预热空气等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条