1) coalescence inclined plate sedimentation tank
![点击朗读](/dictall/images/read.gif)
聚结斜板沉降
1.
Through the research of liquid-liquid hydrocyclone,coalescence inclined plate sedimentation tank,multi-filter media filter,agents-adding system,waste oil recovery system,controlling system and skidded structure,the skidded equipment for oily wastewater treatment was developed.
通过对液-液水力旋流技术、聚结斜板沉降技术、多滤料过滤技术等方面的研究,研制出一套撬装式含油污水处理装置,该装置具有结构紧凑、处理效果好、占地面积小、便于操作、便于运输的特点,适于小区块或边缘油田含油污水的处理。
2) Inclined Plate Settler
![点击朗读](/dictall/images/read.gif)
斜板沉降器
1.
Calculation of Treatment Load of Inclined Plate Settlers;
![点击朗读](/dictall/images/read.gif)
斜板沉降器处理负荷的计算
2.
Study on the technology of oil-water seperation in inclined plate settler;
![点击朗读](/dictall/images/read.gif)
斜板沉降器用于油水分离的工艺研究
3.
The results showed that the inclined plate settler was better than the simple gravity settler.
介绍了斜板沉降器的处理负荷与分散带高度及容积利用效率的关系 ,实验研究了分散体系中加入第三组分十二烷基磺酸钠 (SDS)对沉降器处理负荷的影响。
3) intercepting and inclined plate subsidence
![点击朗读](/dictall/images/read.gif)
拦截斜板沉降
1.
This paper mainly studied the subsidence effect of intercepting and inclined plate subsidence system and compare it with the common sedimentation progresses.
对拦截斜板沉降系统沉降效能进行了研究并对该系统与传统沉降工艺沉降效能上进行了对比,实验证明拦截斜板沉降工艺表现出良好的净水效果,具有很好的开发应用前景。
4) decline panel technique
![点击朗读](/dictall/images/read.gif)
倾斜板沉降技术
5) counter-flow inclined plate settler
![点击朗读](/dictall/images/read.gif)
逆向流斜板沉降器
1.
The design principle of an improved counter-flow inclined plate settler was introduced,and the solid-liquid separation performance was compared with the traditional counter-flow inclined plate settler with the same geometrical size.
介绍了一种改进型逆向流斜板沉降器的设计原理,通过试验,与相同几何尺寸的传统型逆向流斜板沉降器的固液分离性能进行了比较。
6) tilt drift
![点击朗读](/dictall/images/read.gif)
倾斜沉降
补充资料:聚三聚氰酸三烯丙酯层合板
分子式:
CAS号:
性质: 以聚三聚氰酸三烯丙酯为基料,玻璃布为增强材料制得的层合塑料。热稳定性和机械强度好,260℃下仍很稳定,且拉伸强度下降不多,而拉伸模量不变。但聚合物与玻璃布黏结力较差,层合板易分层。平纹玻璃布层合板拉伸强度室温下约250MPa,260℃时约200MPa;单向玻璃布层合板分别约为300MPa和230MPa,而拉伸模量在室温和260℃下,均为3.0×104Mpa。将充分浸渍聚三聚氰酸三烯丙酯后的玻璃布叠层至一定厚度,并在加压、加热下层合即得。主要用作绝缘板和装饰板,用于电子工业和装饰业。
CAS号:
性质: 以聚三聚氰酸三烯丙酯为基料,玻璃布为增强材料制得的层合塑料。热稳定性和机械强度好,260℃下仍很稳定,且拉伸强度下降不多,而拉伸模量不变。但聚合物与玻璃布黏结力较差,层合板易分层。平纹玻璃布层合板拉伸强度室温下约250MPa,260℃时约200MPa;单向玻璃布层合板分别约为300MPa和230MPa,而拉伸模量在室温和260℃下,均为3.0×104Mpa。将充分浸渍聚三聚氰酸三烯丙酯后的玻璃布叠层至一定厚度,并在加压、加热下层合即得。主要用作绝缘板和装饰板,用于电子工业和装饰业。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条