1) GCr15 hardened steel
GCr15淬火钢
1.
GCr15 hardened steel is widely used to fabricate various components of roller of high hardness and high resistance to wear which are usually finished machining by grinding process.
GCr15淬火钢广泛用于制造各种对硬度和耐磨性要求较高的轧辊零件，这类零件通常采用磨削工艺进行精加工。
2) GCr15 steel
GCr15钢
1.
Effect of rare-earths carburizing on friction behavior of GCr15 steel laser melting layer;
稀土渗碳对GCr15钢激光熔凝层摩擦行为的作用
2.
The tribological properties of N~+ ion implanted GCr15 steel;
N~+注入GCr15钢摩擦磨损性能研究
3.
Friction and Wear Behavior of SiC_p/Al Composites Dry Sliding Against GCr15 Steel;
SiC_p/Al复合材料-GCr15钢干摩擦磨损行为研究
3) steel GCr15
GCr15钢
1.
The different heat treatment technology experiments are conduced for steel GCr15 to obtain different level of network carbide and demonstrate its effect on impact property.
对GCr15钢进行不同的热处理工艺试验,以获得不同级别的网状碳化物,网状碳化物对冲击性能的影响研究表明:网状碳化物级别升高,冲击性能下降;还研究了退火态与淬回火态网状碳化物之间的关系。
2.
20,comparison analysis is done to the conventional traveller ring and the one made of bearing steel GCr15 regarding the performance and the service life.
针对国产钢领普遍使用20低碳钢做材质,在使用中存在寿命短、纺纱质量差的弊端,对比了国内普通钢领和采用GCr15轴承钢制造的钢领的各种性能及使用寿命,并对后者的工艺进行了讨论,说明采用GCr15钢制造的钢领能满足目前高速纺纱机的需求,对提高成纱质量提供保证。
4) hardened steel
淬火钢
1.
Selecting the turning tool and cutting parameter for hardened steel;
淬火钢件的车削刀具与切削参数选择
2.
The Experimental Study on High Speed Dry Turning Hardened Steel;
高速硬车削淬火钢的实验研究
3.
Inquiry into the influential facts to tempering performence of hardened steel;
淬火钢回火性能影响因素探讨
5) quenched 45 steel
淬火45#钢
1.
The tribological properties of MoSi_2 material under oil lubrication against quenched 45 steel were investigated with an M-200 type friction and wear tester.
利用M 200型磨损试验机考察了MoSi2 淬火45#钢在20#机油润滑下的摩擦学性能,采用扫描电子显微镜和微探针仪分析讨论其磨损机理。
6) Quenched steel
淬火钢
1.
An analytical function for describing hardness distribution in round section of quenched steel,known as U-curve,has been established.
建立了描述淬火钢圆形截面硬度分布曲线——U曲线的解析函数表达式。
2.
The mechanism of cutting force, cutting temperature and tool wear in the machining of quenched steel and nickel based high temperature alloy with ceramic tools are analyzed in the paper.
重点分析了陶瓷刀具在切削淬火钢和镍基高温合金中有关切削力、切削温度、刀具磨损等方面的机理。
补充资料：GCr15钢中的大型非金属夹杂物(铝酸盐)×500
GCr15钢中的大型非金属夹杂物(铝酸盐)×500
GCrl5钢中的大型非金属夹杂物(铝酸盐) ×500
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条