1) Ni-S coating
Ni-S镀层
2) Ni-Fe-W-S alloy brush plating layer
Ni-Fe-W-S合金刷镀层
3) composite LaNi_5/Ni-S film
复合型LaNi_5/Ni-S合金镀层
1.
By molten salt electrolysis combined with aquatic electrodeposition,the composite LaNi_5/Ni-S film with high stability and hydrogen evolution reaction activity was obtained.
通过熔盐电解结合水溶液电沉积方法获得了复合型LaNi_5/Ni-S合金镀层。
4) Ni-P plating
Ni-P镀层
1.
In this paper the properties of electroless Ni-P plating are briefly described,and the application of this process in industry is fairly minutely introduced.
简述了化学镀Ni-P镀层的性能,并较详细地介绍了该工艺在工业生产中的应用。
2.
The Ni-P plating and Ni-P-SiC composite coating were prepared using electroless deposite method on the surface of low-alloy cast iron.
作者利用化学沉积法在低合金铸铁表面分别制取了Ni-P镀层和Ni-P-SiC复合镀层,并就两者的耐磨性与铸铁、磷化处理表面及Cr镀层的进行了对比试验研究。
3.
The acidic-alkaline composite deposits composed of alkaline Ni-P plating as bottom film and acidic Ni-P plating as top film could provide the best protection,and the corrosion resistance of single acidic Ni-P deposit was better than that of single alkaline Ni-P deposit.
5%NaCl溶液中的极化曲线,对比分析了酸性和酸碱复合条件下所得Ni-P镀层的表面形貌。
5) Ni-P coating
Ni-P镀层
1.
Effect of mechanical attrition on microstructure and property of electroless plating Ni-P coatings on magnesium alloy;
机械研磨对镁合金化学镀Ni-P镀层结构及性能的影响
2.
Effect of a Ni-P coating on the tensile strength of carbon fibers evaluated by a Weibull statistical method;
用Weibull统计方法评价Ni-P镀层对炭纤维抗拉强度的影响
3.
The impact of NH_4Cl,NaF and organic compound M on the deposition rate of Ni-P coating is discussed,and the surface morphology,adhesion and corrosion resistance against nitric acid of the coatings are investigated.
结果表明:三种物质都可以作为镀液的加速剂,合理控制它们的比例所形成的复合加速剂可以使加速效果达到最佳状态,而且此时的Ni-P镀层具有良好的表面质量、结合强度和耐蚀性。
6) Cu/Ni coating
Cu/Ni镀层
1.
Interfacial reactions between Sn-Cu solder alloy and Cu/Ni coatings during reflow soldering;
SnCu钎料镀层与Cu/Ni镀层钎焊接头的界面反应
补充资料：磁性镀层
分子式：
CAS号：
性质：用于提高某些金属或非金属零件的磁性要求的电镀层。如录音机或电子计算机等设备中的录音带、磁环线、记忆鼓等储存系统，一般镀镍铁、镍钴、镍铬磷等合金。通过改变电镀工艺参数，可获得不同性能的磁性镀层。
CAS号：
性质：用于提高某些金属或非金属零件的磁性要求的电镀层。如录音机或电子计算机等设备中的录音带、磁环线、记忆鼓等储存系统，一般镀镍铁、镍钴、镍铬磷等合金。通过改变电镀工艺参数，可获得不同性能的磁性镀层。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条