1) pulse dielectric breakdown
脉冲击穿强度
2) Pulsed breakdown
脉冲击穿
1.
In the first Experiment, the pulsed breakdown of the pressured water has been investigated.
自行设计了一套实验装置，在此装置上进行了压力水介质脉冲击穿特性实验研究和螺旋Blumlein型脉冲形成线原理性实验研究。
3) impulse strength
脉冲强度，冲击强度
4) Breakdown Strength
击穿强度
1.
Although the breakdown strength of the SF6-CO2 gas mixture is slightly lower than that of the corresponding SF6-N2 gas mixture in a uniform field, it is superior to the SF6-N2 in non -uniform fields especially under lightning impulses.
研究表明,虽然SF_6—CO_2混合气体在均匀电场中的击穿强度稍逊于同样混合比的SF_6—N_2混合气体,但在不均匀电场中的击穿强度、特别是在雷电冲击电压下的击穿强度,却优于SF_6—N_2。
2.
In order to improve the breakdown strength and lower the dielectric loss of BaTiO3(BT) based ceramics,BaxSr1-xTiO3(BST) ceramics with x=1,0.
为了提高钛酸钡基陶瓷的击穿强度及降低介电损耗,用传统粉末冶金法制备了BaxSr1-xTiO3陶瓷(x=1,0。
5) impact strength
冲击强度
1.
Fatigue and impact strengths of austenitic stainless steel by powder injection molding;
粉末注射成形奥氏体不锈钢的疲劳和冲击强度
2.
Measures for improving impact strength of block copolymer of propylene;
提高嵌段共聚PP冲击强度的措施探讨
3.
Analysis on factors affecting impact strength of bulk polystyrene resin;
本体聚苯乙烯树脂冲击强度影响因素分析
6) impact resistance
冲击强度
1.
The relation between the compatibility of PC/PBT and PC/PA alloys and the impact resistance intensity of their products were studied by using TEM, DSC, FT IR and etc.
用 TEM、DSC、FT- IR等方法对 PC(聚碳酸酯 ) / PBT(聚苯并噻唑 )、PC/ PA(聚酰胺 )合金的相容性和冲击强度的关系进行了研究。
2.
The effects of componets and contents on surface hardness, impact resistance, defromation start temperature, density an so on were systematically studied.
系统研究了材料的组成对表面硬度、透光率、冲击强度、热变形温度、密度等性能的影响。
补充资料：击穿强度
分子式：
CAS号：
性质：又称介电击穿强度。材料在电场作用下不致被破坏(击穿)所能承受最高的电场强度。通常用试样击穿电压值与其厚度(两电极板间试样平均厚度，涂料为漆膜)之比表示，单位为kV/mm。
CAS号：
性质：又称介电击穿强度。材料在电场作用下不致被破坏(击穿)所能承受最高的电场强度。通常用试样击穿电压值与其厚度(两电极板间试样平均厚度，涂料为漆膜)之比表示，单位为kV/mm。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条