说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 酸基压裂液
1)  acid-base fracturing fluid
酸基压裂液
2)  acid fracturing fluid
酸压裂液
3)  fracturing base fluid
压裂基液
1.
The paper presents the reason and result for the reforming of the craft to prepare for fracturing base fluid,and outlooks its development in the future.
着重阐述了GR-11胍胶压裂基液配制工艺的设计原因、过程及设计后的效果并对配液行业的发展方向进行了展望。
2.
This paper analyzes the result on spot experiments confecting fracturing base fluid influence on 6 factors,explains the influence mechanism for 6 factors,ensures the best condition on confecting fracturing base fluid through the face-crossing experiment.
就压裂基液配制的6个因素通过现场实验研究,对其结果进行了分析,将其因素的影响机理进行了阐释,通过正交试验确定了压裂基液配制的最佳条件。
3.
This paper studies the field test on the practicability of the rebirth of the rest fracturing base fluid in fracture construction,analyzes the result,and discovers the calculating method after mixing fracturing base fluid in different paste values.
对压裂施工剩余压裂基液回收再利用的可行性进行了现场实验研究,对其结果进行了分析,找到了不同黏度的压裂基液(清水以黏度为1 mPa。
4)  acidic fracturing fluid
酸性压裂液
1.
A new kind of gelatinizer(CJ2-9) is developed and formulation of the acidic fracturing fluid is confirmed in the paper.
研制开发出一种新型酸性压裂液增稠剂——CJ2-9,并确定了酸性压裂液的配方。
5)  oil base fracturing fluid
油基压裂液
1.
Experiments were done to optimize the oil base fracturing fluids, in which the dewatered crude from Huangchang oilfield was used as the base fluid, LHPG02 (a phosphate) was used as the gelling agent, sodium metaaluminate as the cross-linking agent, and anhydrous sodium acetate as the gel breaker.
通过试验优选出了适应本区块特点的油基压裂液。
2.
The synthesis condition of gelling agent phosphate ester in oil base fracturing fluid is studied on this paper.
探讨了油基压裂液胶凝剂磷酸酯的合成条件 ,进而对配制的压裂液性能进行了评价。
6)  water-base fracturing fluid
水基压裂液
1.
Quality control technology of water-base fracturing fluid for field operation.;
水基压裂液现场实施质量控制技术
2.
Especially, the water-base fracturing fluid has adapted encapsulated gel-breaking technique,.
吐哈油田针对油田储层及油藏类型开展了压裂液体系的适应性评价研究,尤其是水基压裂液应用了胶囊破胶技术、延迟胶联技术、低温破胶技术及低残渣稠化剂,满足了吐哈低渗深井油藏在不同油藏温度及压裂施工条件下对压裂液性能的要求,为保证压裂效果奠定了基础。
补充资料:水基冻胶压裂液
分子式:
CAS号:

性质:用交联剂将水中聚合物交联而得的压裂液,它的主要组成是水、成胶剂、交联剂、破胶剂。其中成胶剂主要是指稠化剂;交联剂多用无机盐,如铬盐、锑盐、铝盐,不过这类交联剂只适于低温,如用于高温(一般指120℃以上),则需加热稳定剂,如Na2SO4等。另外,也可用油田用高温交联剂(有机钛、有机锆等);破胶剂主要是用过氧化物,其作用是经过一段时间后使冻胶破胶液化,易于排出地层。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条