1) Ti-Si eutectic alloy
Ti-Si共晶合金
1.
The phase composition andfracture mechanism of several Ti-Si eutectic alloys were studied.
深入研究了固溶处理、循环热处理、微合金化以及合金化对提高Ti-Si共晶合金塑性，改善微观组织和压缩性能的影响。
2.
Experimental results indicate that the microstructure of the cast Ti-Si eutectic alloy is composed ofα-Ti and Ti_5Si_3.
观察到在不同Si含量的Ti-Si合金中，Ti-Si共晶合金具有最好的微观组织与力学性能。
3.
This paper discussed the effect of alloying elements on thehigh-temperature oxidation behavior of Ti-Si eutectic alloys.
本文讨论了合金化对Ti-Si共晶合金的高温氧化性能的影响。
2) Ti Si alloy
Ti-Si合金
1.
The microstructures and properties of Ti Si alloys prepared by arc melting with non consumable tungsten electrode in a water cooled copper hearth under a purified argon atmosphere were studied in this paper.
X射线衍射结果 ,室温下铸态 Ti-Si合金的组织由α-Ti基体和金属间化合物 Ti5Si3两相组成 ,具有非平衡凝固特征。
3) Hypereutectic Al-Si Alloy
过共晶Al-Si合金
1.
Effects of Cooling Rate on Primary Si in Hypereutectic Al-Si Alloy;
冷却速度对过共晶Al-Si合金初生Si的影响规律
2.
Microstructure and wear characteristics of spray forming hypereutectic Al-Si alloy;
喷射成形过共晶Al-Si合金的组织特征和磨损行为
3.
Influence of the RE on the P Modified Hypereutectic Al-Si Alloy;
稀土对过共晶Al-Si合金P变质效果的影响
4) Al-Si eutectic alloy
Al-Si共晶合金
1.
Research into fine powders of Al-Si eutectic alloy melting;
Al-Si共晶合金微粉熔化的研究
2.
The couple of Al-Si eutectic alloy and 1Cr18Ni9Ti stainless steel canister used in reactor was prepared by powder-metallurgy method.
用粉末冶金法制备了Al-Si共晶合金与1Cr18Ni9Ti不锈钢反应堆扩散偶。
3.
The status of the solidified structure of Al-Si eutectic alloy under the affection of alternate current electric field is investigated.
电场的处理作用使Al-Si共晶合金中潜在的形核质点增加,电流密度为16。
5) Hypoeutectic Al-Si alloy
亚共晶Al-Si合金
1.
With the thermal analysis the paper researches the solidification process of the hypoeutectic Al-Si alloy.
用热分析技术分析亚共晶Al-Si合金的凝固过程,发现样杯模数、样杯结构是影响其凝固过程特征的主要因素。
2.
Based on detail reviews of the progress of hypoeutectic Al-Si alloys, the present study investigated some hypoeutectic Al-Si alloys with moderate mechanical strength for non-heavy-stressed components .
亚共晶Al-Si合金具有比重小、比强度高、铸造性能和机械加工性能好、耐腐蚀、容易回收利用、有利于节能、减轻制动、环境友好等等优点,已成为机车车辆最有前途的轻合金材料之一,具有巨大的发展潜力。
3.
However,a new process that can perform a hypoeutectic Al-Si alloy with part of primary silicon phase is presented.
本文提出了一种在亚共晶Al-Si合金中形成部分初生硅相的方法。
补充资料：ZG4Cr25Ni35WNb合金中的共晶组织
ZG4Cr25Ni35WNb合金中的共晶组织
717
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条