1) Chitosan loaded on Zeolite Resins (ZEO-CTS)
沸石基壳聚糖树脂(ZEO-CTS树脂)
2) Aminated chitosan resin
胺基壳聚糖树脂
3) chitosan resin
壳聚糖树脂
1.
The complexes cross-linkswith EGBE as cross-linking agent under microwave irradiation,Zn 2+ being removed with dilute acid,a new cross-linked chitosan resin with Zn(Ⅱ) cavtitycan be synthesized.
该配合物与乙醇双环氧丙基醚在微波辐射下进行交联反应 ,用稀酸除去Zn2 + ,合成了具有Zn2 + 孔穴的交联壳聚糖树脂。
2.
In comparison with the cross_linked chitosan resin prepared by conventional heating, it has a better adsorption capacity for Cu 2+ , and shows very good stability and reusability unde.
微波辐射下 ,用壳聚糖在稀醋酸介质中与Cu2 +制得壳聚糖Cu2 +络合物 ,然后使壳聚糖铜络合物与戊二醛进行交联 ,用稀酸洗去Cu2 +,制得具有Cu2 +模板离子孔穴的交联壳聚糖树脂 ,考察了该树脂对Cu2 +的吸附性能 。
3.
Using Cu(Ⅱ) ion as template, a series of chitosan resins, with varied contents of template ion, were prepared by reacting chitosan(CTS) with crosslinking agent ethylene glycol bisglycidyl ether(EGBE), and their static adsorption properties such as adsorption capacities, kinetic and isotherm for Cu 2+ , Ni 2+ , Co 2+ were studi that.
以铜（Ⅱ）离子为模板剂，合成了一系列模板离子含量不同的乙二醇双缩水甘油醚交联的壳聚糖树脂，并研究了该类吸附剂对几种过渡金属离子的静态吸附性能。
4) carboxymethyl cross-linked chitosan resin
羧甲基交联壳聚糖树脂
1.
The carboxymethyl cross-linked chitosan resin(C-C-CTS),which remained stable in acidic medium and did not lose its chelation property comparing with ordinary chitosan resin,was synthesized by simple two-step procedures.
羧甲基交联壳聚糖树脂(C-C-CTS)与普通壳聚糖树脂相比,既能在酸性介质中不溶又不失去其螯合性能。
5) Crosslinking chitosan resins
壳聚糖交联树脂
6) crosslinked chitosan resin
交联壳聚糖树脂
1.
With the salt effect theory, the influence of external- added salts (Lid, NaCl, KCl, LiBr, NaBr, KBr, MgCl2, CaCl2, SrCl2) concentration on adsorption rate of benzoic acid by crosslinked chitosan resin in trinal system (acid + water + salt) is discussed.
利用电位法,跟踪观察交联壳聚糖树脂在不同环境体系吸附低浓度苯甲酸的行为,结合盐效应理论讨论了在三元体系(酸+水+盐)中,LiCl、NaCl、KCl、LiBr、NaBr、KBr、MgCl2、CaCl2、SrCl2 9种外加盐对交联壳聚糖树脂吸附苯甲酸吸附速率的影响。
2.
Our aim is to develop a novel type crosslinked chitosan resin (AECTS) withgood properties in this paper.
本研究旨在开发一种性能良好的新型交联壳聚糖树脂(AECTS)。
补充资料：聚十二内酰胺树脂
分子式：[NH-(CH2)11-CO]n
CAS号：
性质：学名聚酰胺12(polyamide l2)，商品名尼龙12(nylon 12)。相对密度1.01～1.02，熔点178℃，拉伸强度50～64MPa，弯曲强度74MPa，悬臂梁(缺口)冲击强度4～6kJ/m，体积电阻率1014Ω·cm，介电强度17kV/mm，热变形温度(1.82MPa)54.5℃。耐磨性、自润滑性、柔韧性优良，吸湿性小，与金属黏合力强。由ω-十二内酰胺开环聚合或由12-氨基十二酸缩聚制得。可用挤塑、注塑、浸渍、静电涂敷、火焰喷涂、旋转成型等方法成型。可增强、填充改性。主要用于耐油软管、单丝、金属黏合剂、热敏线、精密机械零部件、电气仪表零部件、耐磨制件，亦可制宇航军工零部件。
CAS号：
性质：学名聚酰胺12(polyamide l2)，商品名尼龙12(nylon 12)。相对密度1.01～1.02，熔点178℃，拉伸强度50～64MPa，弯曲强度74MPa，悬臂梁(缺口)冲击强度4～6kJ/m，体积电阻率1014Ω·cm，介电强度17kV/mm，热变形温度(1.82MPa)54.5℃。耐磨性、自润滑性、柔韧性优良，吸湿性小，与金属黏合力强。由ω-十二内酰胺开环聚合或由12-氨基十二酸缩聚制得。可用挤塑、注塑、浸渍、静电涂敷、火焰喷涂、旋转成型等方法成型。可增强、填充改性。主要用于耐油软管、单丝、金属黏合剂、热敏线、精密机械零部件、电气仪表零部件、耐磨制件，亦可制宇航军工零部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条