1) directional electrocrystallization
定向电结晶法
2) aligned
定向
1.
Experimental research of compression plastic properties of aligned multi-wall carbon nnotubes;
定向多壁碳纳米管束的压缩塑性实验研究
2.
Synthesis of aligned carbon nanotubes by chemical vapor deposition(CVD);
定向碳纳米管的化学气相沉积制备法
3.
Growth of well-aligned carbon nanotubes arrays by chemical vapor deposition;
化学气相沉积法制备定向碳纳米管阵列
3) orientation
定向
1.
The methods of improving the gyroscopic theodolite orientation efficiency and benefit;
提高陀螺经纬仪定向效率的方法
2.
Application of Gyroscope Orientation in Mine Pit Relation Survey;
陀螺经纬仪定向在矿井联系测量中的应用
3.
A Study on Effect of Change of Voltage on Gyro-orientation;
电压变化对陀螺定向的影响研究
4) directional
定向
1.
The effect analysis of carrying on connection survey with one mine and two mines combined directional method;
一井与两井定向并用测量的探讨
2.
Using screw directional drilling technology in the existing borehole,through probing into this technology application in such respects as selecting the equipment,machines and tools for use,directional and whipstocking test and so on,have achieve the anticipated geological purpose.
在原有的钻孔中试验使用螺杆定向钻进技术,通过对设备、机具选用,定向及造斜技术试验等方面探讨了这一技术的应用,达到了预期的地质目的,为定向钻进技术的推广应用作了有益的尝试。
3.
In order to recover its production,it was determined to drilling a directional side tracking well Wangyun 2B well inside casings.
为了恢复王云2井的生产,确定在套管内开窗定向侧钻王云2B井。
5) direction
定向
1.
Apptication of the directional break blasting technology in smooth blasting;
定向断裂爆破技术在光面爆破中的应用
2.
Model of Amplitude-phase Imbalance for Directional Receiver of Monopulse Radar;
单脉冲雷达合并通道定向接收机建模
3.
This text introduces the application of theodolite in the directional measure technique in Qidong ventilation shaft.
简要介绍了陀螺经纬仪在定向测量中的应用和祁东风井联系测量技术。
6) oriented
定向
1.
Oriented growth of grains or oriented distribution of SiC whiskers in the sheets is controlled by using compacting rolling method.
利用轧膜工艺使层内的晶粒、晶须产生定向增韧,通过调整外部层状复合结构得到材料的两级增韧效果,并实验制备了高韧性层状复合Si3N4基陶瓷材料。
2.
Comparisons of the oriented infrared spectra data on the quantitative basis show that there are different concentrations of C-H and C-C bonds in the directions vertical to (100), (110) and (111).
本文对天然金刚石在垂直于 ( 10 0 )、( 110 )和 ( 111)三个方向上定向红外光谱进行了定量比较分析 ,指出C—H键和C—C键在以上三个方向上的浓度不相同 ,引起C—H键和C—C键在不同方向上的浓度差异是由于氢具有优先取代垂直于 ( 111)方向上C—C键中碳原子的倾向。
参考词条
补充资料:定向结晶铝镍钴合金磁体
定向结晶铝镍钴合金磁体
alnic'o magnet with directed grain
d一ngx一angleJ一ng IUn一egu hejlne一tl定向结晶铝镍钻合金磁体(alnieo magnetwith direeted grain)用铝镍钻系合金铸造的具有晶粒择优取向的高性能磁体。铸造铝镍钻磁体的磁结构受其晶体结构的影响。晶体的<1。①为易磁化方向,发展完善的(100>晶体织构(柱状晶)可使磁体获得更好的磁性能。 在商业磁体中,根据定向结晶的完善程度可分为部分晶体取向磁体和完全晶体取向磁体。高剩磁和高矫顽力型铝镍钻合金均可制成定向结晶磁体。由典型的高剩磁合金制成的定向结晶磁体(美国牌号AlnicosDG,中国牌号LNG52)的最大磁能积(BH)。二由等轴晶的32~40kJ/m3提高到柱状晶的52一56 kJ/m3;由典型的高矫顽力型合金制成的定向结晶磁体(Alnicog型,LNGT72)的(BH)、,由等轴晶的25一4okJ/m3提高到柱状晶的65~sokJ/m3。部分晶体取向磁体的磁性能介于等轴晶磁体和完全晶体取向磁体的性能之间。用合金制造定向结晶磁体的工艺与普通铸造磁体工艺的主要差别在于,前者采用一种特殊的铸造工艺。该工艺的特点是,将融熔的合金浇注到定向导热的铸模中,这种铸模设计成周围绝热、端部导热的结构,以确保晶粒沿导热方向生长。此外应当注意的是,当这种柱状晶磁体在磁场热处理、磁化时以及在磁路结构的应用中,均须沿柱状晶长大的方向进行。定向结晶磁体的应用与普通铝镍钻磁体的应用相同(见铭镍钻系永磁合金),只是由于性能提高,使得所用磁体的体积和重量相应减小。 (肖文涛)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。