说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 双层点
1)  double-pixel thickness points
双层点
2)  double-dot coating
双点涂层
3)  double layer supporting points
双层支点
1.
Assumed the soil structure being well distributed,the depth set in the soil of the supporting structure of double layer supporting point can be determined through analyzing and calculating different horizontal component forecs of the double layer supporting points on the conditions of being functioned by the ground additional load,and of the contrary.
假定土质均匀 ,通过对双层支点支护结构在无地面附加荷载作用下和有地面附加荷载多种情况作用下双层支点水平分力的分析计算 ,旨在确定双层支点支护结构的嵌固深度 ,为深基坑支护工程中双层支点支护结构的设计提供参考 。
4)  Double structure clouds
双层点云
1.
Double structure clouds with points and local least-squares curve fits are applied to obtain the second spatial derivatives, which is different from the traditional gridless method.
如何成功地把这种方法应用在数值传热学中,本文主要做了以下几方面工作:首先,抛弃了通过构建形函数,并运用残差法来离散控制方程的这一传统方法,本文是通过构建双层点云结构,并在此基础上运用一阶线性解函数来拟合二阶空间导数的方法来离散控制方程。
5)  double-layer quantum dots
双层量子点
1.
The negatively charged exciton in double-layer quantum dots;
双层量子点中的带负电荷激子(英文)
6)  two-level-node graph
双层节点图
1.
After modeling satellite networks with two-level-node graph, a fault identification algorithm based on PMC test invalidation model is presented and proved to be correct.
在采用双层节点图对卫星网络建模的基础上,提出一种基于PMC测试无效模型的卫星网络故障识别算法,并证明了算法的正确性。
2.
A novel modeling method for satellite networks,two-level-node graph,was presented to characterize the specialty that a satellite could have more than one communication directions and its communication function could be faulty partly.
针对卫星可以具有多个通信方向且可以部分通信失效的特性,提出了一种新颖的卫星网络建模方法———双层节点图,设计了基于广播的卫星网络系统级诊断方案,并对其通信开销进行了理论分析。
补充资料:闭式单点、双点压力机
代码:00413
设备名称:闭式单点、双点压力机
型号规格:公称力≥800kN
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB10924-89、GB10933-89、JB5200-91
1、滑块下平面对工作台上平面的平行度(mm)
30%精度储备20%精度储备达到规定值大于规定值 
0.02+0.10/100×滑块下平面的被测长度
     
2、滑块行程对工作台上平面的垂直度
30%精度储备20%精度储备达到规定值大于规定值 
0.05+0.02/100×滑块行程长度
     
(二)结构性能
     
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50%
大于规定值10%大于规定值达到规定值达不到规定值 
2、液压超负荷保险装置、微调装置、吨位指示器
全部具有全部具有部分具有没有 
(三)噪声dB(A)
     
1、公称力≤400kN
≤85≤87≤88>88 
2、公称力>400kN
≤87≤88≤90>90 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条