1) Polyarylene sulfide sulfone (PASS)
聚芳硫醚砜(PASS)
2) polyarylene sulfide sulfone
聚芳硫醚砜
1.
Diamine monomers containing sulfone or ketone group were synthesized firstly,then polyarylene sulfide sulfone amide(PASSA) and polyarylene sulfide ketone amide(PASKA) with high molecular weight were synthesized by a low temperature polycondensation reaction in anhydrous N-methylpyrrolidone (NMP).
采用先合成含硫醚键的单体,后进行低温溶液缩聚的方法,合成高分子量的新型聚芳硫醚酰胺类树脂——聚芳硫醚砜酰胺(PASSA)和聚芳硫醚酮酰胺(PASKA),其特性粘数分别为0。
3) poly(arylene sulfide sulfone)(PASS)
聚芳硫醚砜
1.
Electrospinning of poly(arylene sulfide sulfone)(PASS) nanofibers was tentatively studied.
本文初步探索了静电纺丝法制备聚芳硫醚砜(PA SS)纳米纤维。
4) polyarylene sulfide sulfone amide
聚芳硫醚砜酰胺
1.
Diamine monomer containing sulfide was synthesized firstly,then polyarylene sulfide sulfone amide(PASSA)with high molecular weight was synthesized at low temperature.
与以往的以硫化钠为硫源采用高温聚合合成聚芳硫醚类树脂的方法不同,采用先合成含硫醚键的单体,然后进行低温溶液缩聚,合成了高分子量的新型聚芳硫醚砜酰胺(PASSA)树脂,其特性粘度可达到0。
2.
Diamine monomers containing sulfone or ketone group were synthesized firstly,then polyarylene sulfide sulfone amide(PASSA) and polyarylene sulfide ketone amide(PASKA) with high molecular weight were synthesized by a low temperature polycondensation reaction in anhydrous N-methylpyrrolidone (NMP).
采用先合成含硫醚键的单体,后进行低温溶液缩聚的方法,合成高分子量的新型聚芳硫醚酰胺类树脂——聚芳硫醚砜酰胺(PASSA)和聚芳硫醚酮酰胺(PASKA),其特性粘数分别为0。
5) polyethersulfone with cardo
聚芳醚砜
1.
Effect of ethylene glycol monobutyl ether on membrane forming systems and polyethersulfone with cardo performance and structure;
乙二醇甲醚对聚芳醚砜铸膜液体系及膜性能与结构的影响
2.
Effects of ether on performance and structure of polyethersulfone with cardo ultrafiltration membrane;
乙醚对酚酞基聚芳醚砜超滤膜性能和结构的影响
3.
Factors affecting ternary phase diagrams of polyethersulfone with cardo(PES-C)/DMAc/water solution system;
影响酚酞基聚芳醚砜/DMAc/水三元体系相图的因素
6) Poly(aryl ether sulfone)
聚芳醚砜
1.
Synthesis and Characterization of High Temperature Resistant Poly(aryl ether sulfone);
耐高温聚芳醚砜的合成与表征
2.
Synthesis and properties of high temperature resistant copoly(aryl ether sulfone)s containing a 4-fluorophenyl group
耐高温含氟共聚芳醚砜的合成与性能研究
3.
Three poly(aryl ether sulfone)s containing 1,4-naphthylene moiety were prepared by the nucleophilic polycondensation of 1-chloro-4-(4-chlorobenzenesulfonyl)naphthalene(CCBSN) with 4,4-isopropylidene diphenol(BPA), 1,4-hydroquinone(HQ) and 4-(4-hydroxyphenyl)(2H) phthalazin-1-one(DHPZ), respectively.
聚芳醚砜是耐热等级最高的特种工程塑料之一,自1965年美国UCC公司首先开发成功无定型的聚醚砜(PSF)以来,以其耐热等级高,力学性能强,尺寸稳定,抗蠕变,耐腐蚀,耐辐射等一系列良好的综合性能,很快在宇航,电子,电器,信息,能源等高新技术领域得到广泛应用。
补充资料:玻璃纤维增强聚芳醚砜
分子式:
CAS号:
性质:GFRPES 用玻璃纤维与聚芳醚砜混炼而得玻璃纤维增强聚芳醚砜。用玻璃纤维增强时,拉伸强度120MPa,弯曲强度171MPa,热变形温度大于210℃,作耐高温、高强度的结构复合材料,可在航空、电子、能源、汽车、石化等领域中应用。可制作化工防腐管道、阀门、泵、电子接插件、电视机零部件。
CAS号:
性质:GFRPES 用玻璃纤维与聚芳醚砜混炼而得玻璃纤维增强聚芳醚砜。用玻璃纤维增强时,拉伸强度120MPa,弯曲强度171MPa,热变形温度大于210℃,作耐高温、高强度的结构复合材料,可在航空、电子、能源、汽车、石化等领域中应用。可制作化工防腐管道、阀门、泵、电子接插件、电视机零部件。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条