1) crystal orientation
晶格取向
1.
The influences of crystal orientation on copper oxidation were investigated.
本文研究了具有不同晶格取向的铜的氧化特性。
2) syntaxic intergrowth
共晶格取向连生
1.
The phenomena of five new syntaxic intergrowths between polytypes in parisite(BS)and B_2S regular mixed-layer mineral have been discovered.
利用透射电子显微镜研究钙稀土氟碳酸盐矿物中不同多型体间共晶格取向连生的微结构，发现氟碳钙铈矿（ＢＳ）及Ｂ＿２Ｓ规则混层矿物不同多型体之间存在５种新的共晶格取向连生现象，共晶格取向连生面网为（０００１）。
3) grain orientation
晶粒取向
1.
EBSD study of CVD-W grain orientation and grain boundary;
CVD-W晶粒取向和晶界结构的EBSD研究
2.
Analysis of the grain orientation and texture of friction stir welded magnesium alloy lap joints;
镁合金搅拌摩擦焊接头晶粒取向和织构分析
3.
Effect of nitrogen ion implantation on grain orientation in surface layer of 6061 aluminum;
离子注N对6061铝合金表层晶粒取向的影响
4) crystal orientation
晶体取向
1.
The surface mapping and crystal orientation of body-centered cubic thin metal tungsten films of different thickness;
体心立方金属W薄膜晶体取向的膜厚尺寸效应及其表面映射
2.
Multi-scale simulation of the deformation in nano-indentation under different crystal orientations
不同晶体取向下纳米压痕的多尺度模拟
3.
The evolvement characteristic of crystal orientation of AZ31 magnesium alloy sheet at different channel clearances and effects of channel clearances on its microstructures and mechanical properties during equal channel angular rolling(ECAR) are investigated.
研究了不同通道间隙下,AZ31镁合金板材在等径角轧制过程中晶体取向的演化特征以及通道间隙对其显微组织和力学性能的影响。
5) crystallographic orientation
晶体取向
1.
Effects of crystallographic orientation on void growth and coalescence;
FCC晶体中晶体取向对孔洞长大和聚合的影响
2.
Optimization design of crystallographic orientation in single crystal turbine blade;
单晶涡轮叶片晶体取向优化设计
3.
It was found that the persistent slip bands(PSBs) might exhibit different dislocation features depending upon crystallographic orientation,such as ladder structures in the [■ 1 2] crystal and irregular or partially regular cell structures aligned along the primary sl.
结果表明,驻留滑移带(PSBs)的位错结构随晶体取向的不同可呈现出不同的形态,如:[■ 1 2]晶体中的楼梯结构和[■ 2 3]晶体中的沿主滑移面排列的不规则或较规则胞结构。
6) orientation
[英][,ɔ:riən'teɪʃn] [美]['ɔrɪən'teʃən]
晶面取向
1.
Effect of Triangle Pulse Electric Current on the Orientation in Al-Si Near-eutectic Alloy;
三角波脉冲电流对近共晶Al-Si合金晶面取向的影响
2.
XRD measurement was used to study the effect of sputtering parameters on the orientation of Cr underlayers.
利用X射线衍射法对Cr底层晶面取向和磁控溅射参数之间的关系进行了研究 ,结果表明 :如果改变溅射参数 ,使沉积Cr原子获得较大的能量 ,则有利于Cr底层最终以 ( 110 )晶面择优取向。
补充资料：单面取向
分子式：
CAS号：
性质：高分子材料中某种单元(例如分子链轴、晶粒的某一晶轴或某一晶面、纤维状填料的纤维轴或片状填料的片平面)相对于高分子材料的某一特定平面(例如高分子薄膜的膜平面或高分子板材的板平面)择优排列的现象。
CAS号：
性质：高分子材料中某种单元(例如分子链轴、晶粒的某一晶轴或某一晶面、纤维状填料的纤维轴或片状填料的片平面)相对于高分子材料的某一特定平面(例如高分子薄膜的膜平面或高分子板材的板平面)择优排列的现象。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条