1) Smith predicator
Smith预估补偿法
1.
A seam tracking system was designed,the sensor part and the real welding part were independent,that expanded it s use scope,Smith predicator was used to elimin.
设计了一种基于磁控电弧传感器的焊缝跟踪系统,使跟踪系统和焊接系统相对独立,拓宽了其应用范围,采用了Smith预估补偿法来消除滞后对控制系统的影响。
2) SMITH predictive compensation method
SMITH预估补偿方法
1.
A numerical simulation was used to compare the ADRC with the reservedframe normalization method in the coupling loops and the SMITH predictive compensation method in the timedelay loop.
在耦合回路上与反标架正规化(RFN)方法进行比较,在具有延迟特性的回路上与SMITH预估补偿方法进行比较。
3) Smith predictor
Smith预估补偿
1.
Based on the ideal of Smith predictor, a decentralized decoupling and centralized control design method of predictive functional control(PFC) is proposed for two-input two-output(TITO) first-order plus dead-time process.
针对典型的一阶惯性纯滞后2入2出多变量系统,提出了基于Smith预估补偿思想的分散解耦、集中控制的预测函数控制设计方法:将系统分解成两个具有可测扰动的单入单出子系统,当扰动通道的纯滞后时间大于控制通道的纯滞后时间时,控制器输出可根据系统输入输出的已知信息求出;当2个子系统的扰动通道纯滞后时间均小于控制通道的滞后时间,可以通过求解二元一次方程组求出,从而实现多变量预测函数控制。
4) Smith predictor
Smith预估补偿器
1.
An intelligent PID controller is designed to adjust ABR traffic rate on-line in ATM network for the congestion of high-speed communication networks with a Smith predictor introduced in to avoid the adverse effect of roundtrip propagation delay on control.
引入了Smith预估补偿器来消除往返传播时延对控制造成的不利影响。
2.
And the Smith predictor is presented to constrain the adverse effect on control caused by feedback delay.
引入了Smith预估补偿器,以消除反馈时延对控制造成的不利影响。
5) Smith estimation control
Smith预估补偿控制
1.
As to weak control quality of cascade control system which contains pure leg in its subloop, the control strategy of the combination of cascade control system and Smith estimation control system is stated.
针对副回路中包含大滞后过程的串级控制系统控制质量不佳的问题 ,提出将串级控制与Smith预估补偿控制相结合的控制策略 。
6) adaptive Smith predict
自适应Smith预估补偿
1.
This paper analyzes the characteristics of two 10T/h chain boilers and designed a steam pressure control system based on adaptive Smith predictor.
针对某厂两台10T/h链条锅炉的特性,设计了基于自适应Smith预估补偿控制算法的锅炉蒸汽压力控制系统。
补充资料：补偿法
分子式：
CAS号：
性质：又称对消法。一种测量电动势的方法。用一个外加可调的电势与待测电池电动势对抗，当调节至电路上无电流通过时，则两电势恰好对消(或称得到补偿)，此时的外加电势值即为所测电池的电动势。这是一种精确测量电势的常用方法。利用补偿法设计的仪器称电位差计。
CAS号：
性质：又称对消法。一种测量电动势的方法。用一个外加可调的电势与待测电池电动势对抗，当调节至电路上无电流通过时，则两电势恰好对消(或称得到补偿)，此时的外加电势值即为所测电池的电动势。这是一种精确测量电势的常用方法。利用补偿法设计的仪器称电位差计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条