1) Steel liner PTFE vessels
钢衬聚四氟乙烯罐
2) F4-lined steel
钢衬聚四氟乙烯
1.
This paper was based on engineering practice experience, nickel-base alloy, graphite and F4-lined steelhad been applicated in fluorination for a long time, their use condition and anticorrosion instances were introduced.
本文依据工程实践经验,介绍了镍基合金、石墨、钢衬聚四氟乙烯三种材料的应用防腐情况、使用条件,对于氟化选材有指导意义。
3) coil lined outwardly with Teflon
外衬聚四氟乙烯盘管
1.
Defects of cooling coil lined outwardly with Teflon in the porcelain enamel reaction column are analyzed,and a new design scheme of coil coated outwardly with porcelain enamel is proposed.
对搪瓷反应塔外衬聚四氟乙烯盘管缺陷进行分析 ,提出新的外搪瓷冷却管设计方案 ,实现了搪瓷反应塔的全搪瓷化 ,装置运行平稳 ,产品合格率达到 1 0 0 % ,生产周期大幅缩短。
4) PTFE
聚四氟乙烯
1.
Fabrication and Wear Property of Electroless Co-P-PTFE Composite Coatings;
钴、磷、聚四氟乙烯复合镀层性能研究
2.
DAMAGE ANALYSES OF PTFE LINING IN CRUDE DISTILLATION COLUMN;
粗馏塔釜聚四氟乙烯衬里的破坏分析
3.
Analysis of Causes Leading to Destruction of PTFE lining in Coarse Fractionating Tower;
粗馏塔聚四氟乙烯衬里的破坏分析
5) teflon
[英]['teflɔn] [美]['tɛf'lɑn]
聚四氟乙烯
1.
Build-up spiral pipe condenser made of glass lining and teflon;
搪玻璃聚四氟乙烯组合盘管冷凝器
2.
The serviceability and development of teflon used as lubricant additive;
聚四氟乙烯润滑添加剂的使用性能与发展
3.
This paper analyzes the main causes of corrosion on boilers' gas pipelines,puts forth the measure of teflon-steel coated thermoplastic inner-cased pipe,which was implemented.
分析了造成锅炉煤气管道系统腐蚀的主要原因,提出并实施了采用聚四氟乙烯钢覆热滚塑内衬管道的解决办法。
6) polytetrafluoroethylene
[英][,pɔli,tetrə,fluərə'eθili:n] [美][,pɑli,tɛtrə,flʊro'ɛθə,lin, -,flɔr-, -,flor-]
聚四氟乙烯
1.
Effects of Fillers on the Tribological Properties of Polytetrafluoroethylene Based Composites;
填充材料对聚四氟乙烯基复合材料摩擦学特性的影响
2.
Main Moulding Products of Polytetrafluoroethylene and Their Processing Technology;
聚四氟乙烯主要成型制品及生产工艺
3.
Preparation of stretching porous polytetrafluoroethylene membrane;
聚四氟乙烯拉伸微孔膜的制备
补充资料：聚苯硫醚/聚四氟乙烯共混物
分子式：
CAS号：
性质： PPS与FIFE经适当共混得到的新型高分子材料。具有优良的耐磨性和低摩擦系数，特别适合制作轴承。以PPS为主的此类共混物比单纯PPS有较高的韧性和耐腐蚀性，而以FIFE为主的此类共混物，例如含20％～40％PPS的FIFE，可提高FIFE的抗蠕变能力、压缩强度，并减少透气性，更适宜制成衬垫材料。
CAS号：
性质： PPS与FIFE经适当共混得到的新型高分子材料。具有优良的耐磨性和低摩擦系数，特别适合制作轴承。以PPS为主的此类共混物比单纯PPS有较高的韧性和耐腐蚀性，而以FIFE为主的此类共混物，例如含20％～40％PPS的FIFE，可提高FIFE的抗蠕变能力、压缩强度，并减少透气性，更适宜制成衬垫材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条