1) flour esterase
漏斗型单滴液相微萃取
2) funnel
漏斗
1.
In view of the big height and large size and complexity of the ore groove structure, large size of concrete funnel, the scientific and rational design, building and construction scheme of the scaffold are put forward to reduce the cost and ensure the construction quality with good effect.
针对矿槽工程结构高大、复杂、混凝土漏斗大等特点,提出科学合理的脚手架设计、搭设、施工方案,降低施工成本,保证了施工质量,取得了良好的效果。
2.
The funnels are the main karst landform in this area,the average area of them are(9?812)?m~2,the total area is(461?179)?m~2 which is 18% of the study area,the average main axis is 120?m in length,the density is 18.
漏斗是本区发育的主要岩溶地貌,它们的平均面积为9 812 m2,总面积达461 179 m2,占研究区面积的18%,长轴平均长120 m,发育密度为18。
3.
Big funnel structure in industrial buildings is difficult to construct due to its complicated construction procedure,not only spending a great amount of manpower and time but also consuming a number of special shaped formwork and supporting materials.
工业建筑中的大型混凝土漏斗施工较为困难,其施工的工序也较为复杂,既费工费时,又耗用大量异型模板和支撑材料。
3) hopper
漏斗
1.
Study on the Normal Pressure Ratio of Stored Material in Hopper;
漏斗贮料法压力系数研究
2.
Point at the problems of the conveying system hoppers sticking of materia,build-up and abrasion wear,a series of measures e.
针对莱钢烧结厂原料、配料及成品系统皮带机漏斗存在的一些问题进行了分析,通过合理选择衬板材质及改进漏斗结构,使漏斗寿命显著提高,设备停机时间减少,进一步降低了成本和消耗。
3.
Wearing away of a belt conveyer s hopper for the systems of raw materials,charge mixture and fin- ished products is analyzed.
对莱钢烧结厂原料、配料、成品系统皮带机漏斗存在易磨损现象进行了分析,通过优化漏斗结构和材料,漏斗使用寿命显著提高。
4) Metering hopper
计量漏斗
5) blasting crater
爆破漏斗
1.
The formation of a normal blasting crater for the break blasting of a roadway in rock with high residual stress was investigated based on the theory of cylindrical blasting crater.
以柱装药爆破漏斗理论为基础,对高地应力巷道崩落爆破标准漏斗形成进行研究,导出了高应力条件下形成崩落爆破标准漏斗的判断准则,进而导出了相应条件的巷道崩落爆破参数计算式。
2.
The blasting crater curves of two different charges,the relationship between blasting crater volume and charge embedment depth and crater radius,the optimum blasting crater embedment depth,the critical blasting crater embedment depth and the unit consumption of explosives were disc.
根据利文斯顿爆破能量平衡准则,在安庆铜矿生产现场,进行了系列单孔爆破漏斗试验以及变孔距多孔同段爆破漏斗试验。
6) funnel model
漏斗模型
1.
The study analyses a funnel model in the process of innovation and draws several rules that should be paid more attention for innovation.
对创新过程进行了漏斗模型的分析,最后提出创新要注意的几个规则。
2.
Production planning and controlling based on funnel model is introduced in this paper, description method of flux chart model is discussed.
本文介绍了基于漏斗模型的生产计划与控制方法,讨论了流量图模型描述方法、面向负荷的生产任务投放等概念及技术。
参考词条
补充资料:无柄液滴法、躺滴法、座滴法等
分子式:
CAS号:
性质:又称无柄液滴法、躺滴法、座滴法等。根据液面外形求算表(界)面张力的一种方法。当待测液液滴稳定地停在水平固体表面上,其外形与液体表面张力γ有关。根据巴什弗思–亚当斯(Bashforth-Adams)方程可有以下关系式ρ1和ρ2分别为待测液体及液滴外介质的密度,g为重力加速度,β为形状因子,b为大小因子。当液体与固体表面接触角大于90°时可根据测出的液滴的赤道半径及其与液滴顶点的垂直距离数值查表得出相应的β及b值,从而算出表面张力γ。本法简便,适用于吸附平衡时间长的体系和低表面张力的测定;也能用于测定界面张力及熔融金属的表(界)面张力。
CAS号:
性质:又称无柄液滴法、躺滴法、座滴法等。根据液面外形求算表(界)面张力的一种方法。当待测液液滴稳定地停在水平固体表面上,其外形与液体表面张力γ有关。根据巴什弗思–亚当斯(Bashforth-Adams)方程可有以下关系式ρ1和ρ2分别为待测液体及液滴外介质的密度,g为重力加速度,β为形状因子,b为大小因子。当液体与固体表面接触角大于90°时可根据测出的液滴的赤道半径及其与液滴顶点的垂直距离数值查表得出相应的β及b值,从而算出表面张力γ。本法简便,适用于吸附平衡时间长的体系和低表面张力的测定;也能用于测定界面张力及熔融金属的表(界)面张力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。