1) Santong powder
三通散
1.
Objective:to summarize the effect Santong powder and Buhua decoction on tympania.
目的:总结自拟三通散合补化汤治疗鼓胀的远期疗效。
2) radiator with triple valve
三通散热器
3) three-way diffuser/nozzle
三通扩散/收缩管
1.
A new type of valve-less piezoelectric micropump with three-way diffuser/nozzle was presented to solve it.
针对传统扩散/收缩管无阀压电泵容积效率低,流量小,无法满足小体积大流量应用要求的缺点,本文提出一种新型的三通扩散/收缩管无阀压电泵,该泵是对传统扩散/收缩管无阀压电泵的改进设计。
4) tee
[英][ti:] [美][ti]
三通
1.
Out-of-Plane Bending Moment Analysis of the Plastic Limit for the Welded Piping Tee Containing Bottom Thinning Defects;
底部减薄焊制三通的塑性极限面外弯矩分析
2.
Analysis Method by Fracture Finite Element for Tee with Longitudinal Through-Wall Crack;
含轴向贯穿裂纹三通断裂有限元计算方法
3.
Analysis of plastic limit in-of-plane bending moment for tee containing shoulder thinning defects.;
肩部减薄三通塑性极限面内弯矩的分析
5) piping tee
三通
1.
Plastic limit load for a defect-free welded piping tee under the in-plane bending moment;
焊制三通在面内弯矩作用下的塑性极限载荷
2.
Finite Element Analysis on the Plastic Limit Load of Welded Piping Tee under the External Load;
受外载作用焊制三通塑性极限载荷的有限元分析
3.
Finite Element Analysis on Piping Tee under the External Load;
受外载作用三通的有限元分析
6) Tee Joint
三通
1.
Numerical simulation and experimental study on the drawing forming of branch pipe of tee joint
大口径三通支管拉拔成形数值模拟与试验研究
2.
In this paper the forming process in the multi-ram forging process of high-pressure tee joint used in power industry and petroleum chemistry industry is introduced.
介绍了采用多向模锻锻制动力工业和石化工业用高压三通的工艺过程,通过FEM模拟总结出高压三通的基本成形规律,并揭示了高压三通多向模锻过程中水平冲头向上翘曲现象及其产生原因,为类似锻件的多向模锻工艺的设计提供了有益的借鉴。
3.
During the cold correction for the hot-pressing tee joint P91 hydraulic machine made by Henan Petro-Chemical Machinery Plant,it is split into two pieces.
某热压三通P91用水压机进行冷校时开裂成两半,在断口上有一处裂纹缺陷,我们在裂纹缺陷处取纵向试样进行了化学成分、力学性能和金相组织的测定,找出了造成P91三通冷校开裂的主要原因,另外采用冷校工艺也不合理。
补充资料：广陵散(散ｓǎｎ)
琴曲。三国魏嵇康以善弹此曲著称。相传嵇康因不满司马氏专权而被害，临刑前曾索琴弹奏此曲。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条