1) Al phosphor
Al发光粉
2) Aluminum powder
Al粉
1.
The effects of aluminum powder content on exhaust signature of CMDB propellant,such as visible,infrared and laser transmissivity,infrared radiant temperature and radiance,were studied by using transmitter,thermal-image instrument,FTIR spectrum device and high-speed camera etc.
采用烟雾透射计、红外热像仪、FTIR光谱仪和高速摄像仪等测试仪器研究了Al粉含量对CMDB推进剂可见光、红外和激光透过率、红外辐射温度和红外辐射强度等特征信号的影响规律。
2.
The effects of aluminum powders with different shapes and sizes on the surface morphology,corrosion resistance and electrochemical behavior of the coating were studied by means of scanning electron microscope (SEM),X ray diffraction(XRD),neutral salt spray test and electrochemical impedance spectroscopy.
利用扫描电子显微分析(SEM)、X射线衍射分析(XRD)、中性盐雾实验以及电化学交流阻抗等技术,研究了Al粉的形态与尺寸对热烧结锌铝涂层表面形貌、耐蚀性及其在海水中电化学性能的影响。
3) Al powders
Al粉
1.
The surfaces of micron Al powders were pretreated by different surfactants,then St was polymerized on the surfaces of micron Al powders by dispersion polymerization,so Al-PS composite particles were prepared.
采用不同表面活性剂对微米Al粉进行表面预处理,运用分散聚合方法使苯乙烯(St)在Al粉表面聚合,获得了铝粉-聚苯乙烯(Al-PS)复合粒子;研究了表面活性剂类型对Al粉及Al-PS复合粒子亲水亲油性能、分散性能的影响;通过UV-VIS、FTIR光谱分别对PS对Al粉包覆量及Al-PS复合粒子结构进行了测试和表征。
2.
The surfaces of micron Al powders were pretreated by different surfactants.
采用不同表面活性剂对微米Al粉进行表面预处理,然后运用分散聚合方法使St在Al粉表面聚合,获得了 Al-PS复合粒子;考察了表面活性剂类型对Al粉及Al-PS复合粒子亲水亲油性能、分散性能的影响:通过UV-VIS、 FTIR光谱分别对PS对Al粉包覆量及Al-PS复合粒子结构进行了测试和表征。
4) phosphor
[英]['fɔsfə] [美]['fɑsfɚ]
发光粉
1.
Development on the blue-green long afterglow phosphor doped RE;
稀土蓝绿色长余辉发光粉的研制
2.
Study on the process for producing rare earth metal long phosphorescent phosphor;
稀土长余辉发光粉生产工艺的研究
3.
Study on β-Diketone Coating Phosphor Preparing PVC Light Plastic
β-二酮包覆发光粉制备PVC发光塑料的研究
5) luminescent powders
发光粉体
1.
The luminescent powders, SrAl_2O_4∶Eu~ 2+ ,Dy~ 3+ prepared by the oxalate-coprecipitation method are tested by the TG-DTA,XRD, SEM and luminescents of phosphe.
用草酸盐共沉淀法制备了SrAl2O4∶Eu2+,Dy3+发光粉体,用差热分析仪、X-射线衍射仪、扫描电镜和荧光分光光度计对制备产物进行了测试分析,并对烧成温度,Dy3+、H3BO3掺杂对荧光体发光特性的影响进行了讨论,确定了草酸盐共沉淀法的最佳烧成温度为1200℃,Dy3+最佳掺杂摩尔分数为0。
6) luminous powder
发光粉
1.
Research found that the luminous effect of plastic luminous material, in which the luminous powder was covered with stearate, dimethyl silicone oil , silane coupling agent and SiO2 sol separately, is better than that uncovered.
通过对长余辉蓄能发光粉(以下简称发光粉)的包覆处理,改善了塑料发光材料的发光效果。
补充资料：场致发光材料(见电致发光材料)
场致发光材料(见电致发光材料)
electroluminescent material
见场致发光材料eleetrolumineseent material 电致发光材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条