1) thickness reduction rate of bend tube
弯管壁厚减薄率
2) bend wall dethickness
弯管管壁减薄率
3) wall thickness reduction rate
壁厚减薄率
1.
When thickness is more than 5mm, the wall thickness reduction rate is less than 15%.
在不加芯棒、弯曲半径和外径不变条件下,管坯成形完成后弯曲部椭圆化严重,口部变形很大,随壁厚增加成形性能有较大提高,当壁厚达到5mm以上时,管坯的壁厚减薄率小于15%,基本可以作为工业用弯管使用。
4) thickness decrease
壁厚减薄
1.
Abrasion and erosion of minicrystal in sugar serum is the main reason that made rotating drum's thickness decrease.
通过现场检查、试样检测和应力分析,确定转鼓壁厚严重减薄是该离心机事故的主要原因,而转鼓壁厚减薄的主要原因是糖浆液中的微晶粒磨损和冲蚀转鼓。
5) wall thinning
壁厚减薄
1.
Effects of pressing die's boosting function on wall thinning and springback in NC bending process of thin-walled tube with large diameter;
助推作用对大口径铝合金薄壁管数控弯曲壁厚减薄和回弹的影响
2.
Outwall thinning is a main flaw in tube NC bending process,especially for the thin-walled tube with a small bending radius(R/D≤2).
外侧壁厚减薄是弯管成形中容易出现的加工缺陷之一,对于薄壁管小弯曲半径(R/D≤2)数控弯曲成形尤为严重。
3.
Wall thinning is a main flaw in tube NC bending process,especially for the thin-walled tube with a small bending radius(R/D≤2).
外侧壁厚减薄是弯管成形中容易出现的加工缺陷之一,对于薄壁管小弯曲半径(R/D(?)2)数控弯曲成形尤为严重。
6) thin-winding pipe
薄壁弯管
1.
A mathematial model was developed to study the dynamic behavious ofthin-winding pipe by taking account of the thin-ring pipe element.
以有限元分析计算方法为基础，对薄壁弯管零件的动态特性进行分析计算。
补充资料：长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
长春冷弯型钢总厂生产的异形冷弯型钢
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条