1) real triaxial testing machine
真三轴试验机
2) real triaxial test
真三轴试验
1.
Aiming at the deformation properties of the rock mass in that state,in-situ real triaxial tests are carried out on rock mass with complex loading paths.
为研究三峡永久船闸边坡岩体在此状态下的变形特性,在边坡勘探平洞进行复杂应力路径下的原位岩体真三轴试验,试验荷载模拟边坡初始地应力场及其在边坡开挖过程中的变化情况,按3种路径施加:σ1卸载时,σ2和σ3保持不变;σ1加载时,σ2保持不变,而σ3同步卸载;σ1卸载时,σ2保持不变,而σ3同步加载。
3) true triaxial experiment
真三轴试验
1.
Rock failure mechanism and true triaxial experimental study of specimens with single structural plane under three-dimensional stress
三向应力状态下单结构面岩石试样破坏机制与真三轴试验研究
2.
The complicated evolvement of stress load,which is produced by excavating underground engineering under high stress conditions,is simulated through true triaxial experiment.
通过真三轴试验模拟高地应力条件下地下工程开挖引起的复杂的应力路径的演化。
3.
On the basis of the representative samples of slity clay in Wuhan,china,the lateral unloading soil\'s stress path,which is produced by excavating foundation pit engineering,is simulated through true triaxial experiment.
通过真三轴试验模拟基坑开挖过程中侧向卸荷土体的应力路径,针对武汉地区具有代表性的粉质粘土,进行了一系列真三轴排水和不排水固结剪切试验。
4) true triaxial test
真三轴试验
1.
A study of true triaxial test on lateral unloading of soil mass of foundation pit;
基坑土体侧向卸荷真三轴试验研究
2.
Keeping maximum principle stress and medium principle stress fixed and increasing minor principle stress is a potential stress path, such as the impounding of earth and stone dam and the backfilling of earthwork in practical projects, under which several groups of true triaxial tests about silt soil from Ningbo city are studied.
就该应力路径对宁波淤泥土进行了真三轴试验，针对真三轴试验结果，对本构关系中的弹性模量及反映侧向变形变化规律的泊松比进行了特定条件下的研究。
3.
Mohr-Coulomb Criterion,Lade-Duncan Criterion,Matsuoka-Nakai Criterion and Fang Kai-ze Criterion were compared with the true triaxial test results of gravel.
将Mohr-Coulomb准则、Lade-Duncan准则、Matsuoka-Nakai准则和方开泽准则与砾石料的真三轴试验结果进行比较,发现Matsuoka-Nakai准则和方开泽准则反映的内摩擦角与b的关系与试验得到的规律差别较大,Lade-Duncan准则反映的规律与试验结果最接近,但数值上高估了b对内摩擦角的影响。
5) triaxial testing system
三轴试验机
1.
A 20 MN servo-controlled rock triaxial testing system with high temperature and high pressure developed by the authors is introduced.
详细介绍自行研制的20 MN伺服控制高温高压岩体三轴试验机,该试验机主要由主机加载系统、高温压力室与温控系统、辅机装料系统以及测试系统4个部分组成。
6) true triaxial test data
真三轴试验数据
补充资料：CJ-2计算机控制陶瓷材料高温蠕变试验机
CJ-2计算机控制陶瓷材料高温蠕变试验机
鲡 C」一2计算机控制陶瓷材料高温蠕变试验机 中国科学院上海硅酸生研完所供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条