1) Al2O3-ZrO2-C
铝锆碳
1.
21 μm)and contents of silicon powder(1%,3%,5%,7%)on cold crushing strength(CCS),pore size distribution and microstructure of Al2O3-ZrO2-C refractories coked at high temperature were investigated by mercury porosimeter,scanning electron microscope(SEM),and energy dispersive spectrometer(EDS),etc.
21μm)依次变小)和含量(分别为1%、3%、5%、7%)对埋炭烧成铝锆碳材料的耐压强度、孔径分布和显微结构的影响。
2.
The effects of the sintering temperature and the content of graphite on the properties of Al2O3-ZrO2-C materials are studied experimentally.
为提高铝锆碳耐火材料的性能,研究了烧成温度对铝锆碳耐火材料气孔率、体积密度、常温耐压强度的影响,得出了适宜的烧成温度范围和最佳的锆莫来石加入量,并对此进行了理论分析。
3.
The clogging mechanism of Al2O3-ZrO2-C based submerged nozzle was investigated in the light of clogging condition of submerged nozzle in the process of joint casting.
针对连铸过程浸入式水口的堵塞情况,研究了铝锆碳复合浸入式水口堵塞的形成机理。
2) alumina zirconia carbon brick
铝锆碳砖
3) Al_2O_3-ZrO_2-C slide plate
铝锆碳滑板
1.
Microstructure and erosion factors of Al_2O_3-ZrO_2-C slide plate;
铝锆碳滑板使用前后显微结构与损毁机理
2.
Properties of low silica Al_2O_3-ZrO_2-C slide plate;
低硅铝锆碳滑板的性能研究
3.
147 mm on millipore structure and properties of Al_2O_3-ZrO_2-C slide plate materials were researched,and the in-situ growth mechanism of SiC crystal whisker (reacted) from these carbon materials with silicon powder was analyzed by means of SEM.
147mm的鳞片石墨3种炭素原料对铝锆碳滑板材料的性能及微孔结构的影响,并采用扫描电镜观察材料中原位生成SiC晶须的显微结构变化。
4) Al 2O 3-ZrO 2-C material
铝锆碳材料
1.
Effects of Si, Al, B 4C and their complex on oxidation resistance and physical properties of Al 2O 3-ZrO 2-C material were researched.
研究了Si、Al、B4C及复合添加物对铝锆碳材料的抗氧化性和物理性能的影响 ,探讨了不同添加物的抗氧化作用机
6) composite ceramic aluminum zirconium carbon outlet
陶瓷复合铝锆碳水口
1.
To deal with these problems, composite ceramic aluminum zirconium carbon outlet was researched and developed.
针对这些问题研究开发了陶瓷复合铝锆碳水口,实践证明使用陶瓷复合铝锆碳水口,无需烘烤,内孔抗冲刷性能及抗热冲击性能、抗侵蚀能力有了明显提高,水口使用寿命增加。
补充资料：铝锆碳砖
分子式：
CAS号：
性质：一种氧化铝、氧化锆系耐火材料，含氧化铝64％～72％，氧化锆6％～9％，碳加碳化硅8.5％～15％。加入氧化锆大大提高了材料的抗热震性、耐蚀性、导热性和对熔融金属及渣的不湿润性。体积密度3.0g/cm2，耐压强度110MPa，显孔率6％～12％。采用机压或等静压成型，经高温烧成。用作盛钢桶整体塞棒砖、滑动水口滑板砖等。
CAS号：
性质：一种氧化铝、氧化锆系耐火材料，含氧化铝64％～72％，氧化锆6％～9％，碳加碳化硅8.5％～15％。加入氧化锆大大提高了材料的抗热震性、耐蚀性、导热性和对熔融金属及渣的不湿润性。体积密度3.0g/cm2，耐压强度110MPa，显孔率6％～12％。采用机压或等静压成型，经高温烧成。用作盛钢桶整体塞棒砖、滑动水口滑板砖等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条