1) molded pulp products
纸浆模塑制品
1.
It was put forward to apply neural network method to process the dynamic compression test data of molded pulp products.
根据纸浆模塑制品动态压缩试验的测试数据,提出了采用神经网络方法对试验数据进行处理。
2.
The processing technique of molded pulp products is briefly referred,and the common problems and measures during design,produce are summarized.
简要介绍了纸浆模塑制品的生产工艺,对纸浆模塑制品在设计、生产过程中一些常见的问题及解决方案进行了总结和归纳,为实际生产提供理论指导。
2) Pulp mold packaging product
纸浆模塑包装制品
1.
Pulp mold packaging product (paper mould product for short) is a kind of elaborate paper product, which is made of pulp of waste paper or plant fibred.
纸浆模塑包装制品(简称纸模制品)是采用一定浓度的纸浆或植物纤维浆,通过具有大量网孔的金属模具,利用一定形式的吸附压力使纸质或植物纤维均匀地沉积在模具外表面上,经脱水、脱模、烘干及热压整形而制成的较精细的纸模产品。
3) moulded pulp products
纸浆模制品
1.
The structural design and their changes the product packaging forms,protection requirement,manufacture,and mould design of the moulded pulp products.
纸浆模制品在产品的包装与固定、产品的缓冲防震应用中,是通过各种结构形式来满足对产品的包装保护要求及使用要求。
2.
The structural styles and their changes syn-thesize the product packaging forms and protection requirement,manufacture and mould design of the moulded pulp products.
纸浆模制品在产品的包装与固定、产品的缓冲防震应用中是通过各种结构形式来满足对产品的包装保护要求及使用要求。
4) Paper pulp
纸浆模塑
1.
FEM analysis using ANSYS software was carried out to study the stress and deformation of the structure of the paper pulp pad under the static load.
在机电产品的纸浆模塑衬垫设计中,利用ANSYS软件进行有限元分析,研究静载作用下的衬垫受力及变形情况。
2.
The FEM modeling and analysis is carried out,using the paper pulp packing for hard disk.
分析了纸浆模塑制品在包装应用中的缓冲机理,并将有限元方法引入到纸浆模塑材料的强度分析中,对硬盘包装用纸浆模塑盒进行了有限元分析。
3.
The FEM modeling and analysis is carried out,using the paper pulp packing for mobile telephone.
分析了纸浆模塑制品在包装应用中的缓冲机理,并将有限元方法引入到纸浆模塑材料的强度分析中,针对手机包装用纸浆模塑盒进行了有限元分析。
5) pulp mold
纸浆模塑
1.
Effect of vacuum suction/filtering on quality of disposal pulp molded food wares;
真空吸滤过程影响纸浆模塑制品质量问题的分析
2.
The paper unfolds the overall developing level of the country's pulp mold fast food appliance industry by introducing three fully automatic formers which will provide reference for the development of relative devices.
通过对三种全自动纸浆模塑快餐具成型机的介绍 ,展现了我国纸浆模塑快餐具行业的总体发展水平 ,可为相关设备的开发提供参考。
3.
This article tells about the pulp molded products doing good for dealing with "White pollution" and their effects after our country joining in WTO, then analyzes the theory of vacuum filter molding, high temperature and pressure drying, and finalizes the design.
简要介绍了纸浆模塑制品对治理“白色污染”的重大现实意义以及在我国加入 WTO后可能起到的作用。
6) pulp molding
纸浆模塑
1.
Study on DZJ-A automatic vacuum of pulp molding product line and technology;
DZJ-A型全自动真空纸浆模塑制品生产线及工艺的研究
2.
The paper analyzed how the pulp homogeneity influences the forming of the wet blank in pulp molding which has an actual significance in improving final product ratio.
分析了纸浆模塑中湿坯成形方式对制品均一性的影响,对提高成品率有着现实的意义。
3.
5 automatic equipment of pulp molding product was analyzed.
5型纸浆模塑制品全自动生产设备机械系统及其成型机构、热压机构、物料传送机构等的设计要点。
补充资料：压塑模塑
分子式：
分子量：
CAS号：
性质：见压塑法。
分子量：
CAS号：
性质：见压塑法。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条