1) Yellow River KPI silt cellular
黄河淤泥KPI型多孔砖
2) Yellow River silt cellular brick
黄河淤泥多孔砖
1.
In order to consider the elements affecting the slender high column members made of Yellow River silt cellular bricks through finite experiments,this paper uses the design method of orthogonal experiment to conduct compressive strength tests to these post members and through measurement get the limit bearing power and strain data of each member.
为了通过有限的试验全面有效地考虑多种因素对黄河淤泥多孔砖砌体中长柱构件的影响,运用正交试验的设计方法对黄河淤泥多孔砖砌体的中长柱构件进行抗压试验,测量得到各个构件的极限承载力和应变数据。
3) Yellow River silt bearing cellular brick
黄河淤泥承重多孔砖
1.
Compression resistance of bricking slender high column with Yellow River silt bearing cellular brick;
黄河淤泥承重多孔砖砌体中长柱抗压性能
2.
Based on the experiment of median long columns with Yellow River silt bearing cellular bricking structures subjected to eccentric compression,systematical study is made on their destructive characters,load-strain curve and the strain s mutative regularity of the section,so as to lay a theoretical foundation for wide use of Yellow River silt bearing cellular bricks instead of solid clay ones.
依据黄河淤泥承重多孔砖砌体中长柱的偏心受压试验,对黄河淤泥承重多孔砖砌体中长柱偏心受压的破坏特征、荷载-应变曲线、截面应变变化规律进行了系统的研究,为黄河淤泥承重多孔砖替代实心黏土砖的推广应用打下理论基础。
3.
This paper analyzes and studies the dentiform-section inflected experiment with Yellow River silt bearing cellular bricking structure,summarizes the destructive process,characters and forms of test specimen that have laid a foundation for a further study on Yellow River silt bearing cellular bricking structure and for its popularization as a substitute for clay brick.
对黄河淤泥承重多孔砖砌体沿齿缝截面抗弯性能进行了测试,对试件的破坏过程、破坏特征和破坏形式进行了总结,为黄河淤泥承重多孔砖砌体进一步的研究和替代黏土砖推广使用奠定基础。
4) Yellow River silt sintered cellular brick
黄河淤泥烧结多孔砖
1.
Study on frost resistance of Yellow River silt sintered cellular brick;
黄河淤泥烧结多孔砖抗冻性能研究
5) Yellow River modulus silt cellular
黄河淤泥模数多孔砖
6) the Yellow River silt brick masonry structure
黄河淤泥砖多孔砌体
补充资料：为特型耐火砖和特异型砖
分子式：
CAS号：
性质：又称为特型耐火砖和特异型砖。是一类外形特别复杂的耐火砖。中国标准规定，对于黏土质、高铝质特异型耐火砖，其外形尺寸的比例(最小与最大尺寸之比)在1:8范围以内；厚度尺寸为35～135mm，或管状砖的长度尺寸不大于300mm；具有不多于4个凹角(包括圆弧状凹角在内)，或具有1个30°～50°的锐角，或带有不多于8个沟槽，或有不多于1个孔眼。黏土质耐火砖重1.5～30kg；高铝质耐火砖重1.5～35kg。硅质特异型耐火砖，其外形尺寸的比例在1:6范围以内，厚度尺寸为35～135mm，或管状砖的长度尺寸不大于300mm；具有不多于4个凹角(包括圆弧状凹角在内)，或具有30°～50°的锐角，或带有4个沟槽，或带有不多于1个孔眼，重1.5～25kg。
CAS号：
性质：又称为特型耐火砖和特异型砖。是一类外形特别复杂的耐火砖。中国标准规定，对于黏土质、高铝质特异型耐火砖，其外形尺寸的比例(最小与最大尺寸之比)在1:8范围以内；厚度尺寸为35～135mm，或管状砖的长度尺寸不大于300mm；具有不多于4个凹角(包括圆弧状凹角在内)，或具有1个30°～50°的锐角，或带有不多于8个沟槽，或有不多于1个孔眼。黏土质耐火砖重1.5～30kg；高铝质耐火砖重1.5～35kg。硅质特异型耐火砖，其外形尺寸的比例在1:6范围以内，厚度尺寸为35～135mm，或管状砖的长度尺寸不大于300mm；具有不多于4个凹角(包括圆弧状凹角在内)，或具有30°～50°的锐角，或带有4个沟槽，或带有不多于1个孔眼，重1.5～25kg。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条