1) acrylic-emulsion
丙乳
1.
The results show that the cement blending the acrylic-emulsion could resist the erosion from the high concentrations of sulfate,Cl-and Mg2+,and the agents could improve the resistance of the cement to the sulfate crystal.
结果表明:在水泥砂浆中掺入丙乳能够抵抗较高浓度的SO42-、Cl-和Mg2+的侵蚀,且能有效提高水泥抵抗硫酸盐结晶的侵蚀。
2) styrene-acrylate emulsion
苯丙乳液
1.
Surface modification and characterization of nanometer TiO_2 for nanometer styrene-acrylate emulsion polymerization;
用于合成纳米苯丙乳液的纳米TiO_2表面改性及表征(英文)
2.
Study on synthesis of core-shell type of styrene-acrylate emulsion with silicon;
核/壳型含硅苯丙乳液的合成与研究
3.
Research on Synthesis and Properties of Styrene-acrylate Emulsion in Textile;
纺织用苯丙乳液的合成及性能研究
3) silicone-acrylate emulsion
硅丙乳液
1.
Preparation of high performance expanding type silicone-acrylate emulsion fireproof coating;
高性能膨胀型硅丙乳液防火涂料的制备
2.
A polyacrylate emulsion modified by silicone(silicone-acrylate emulsion) is prepared with sodium dodecyl sulfate(SDS) and OP-10 as emulsifier,acrylate and ethylene silicone oils as raw materials by means of continuous dripping.
由于有机硅的低表面能和硅氧烷的长链大分子结构,难以被乳化剂乳化而进入胶束,有机硅和丙烯酸单体的共聚受到很大限制,因此以丙烯酸酯、乙烯基硅油为主要原料,以OP-10和十二烷基硫酸钠(SDS)为复合乳化剂,采用连续滴加法,制备了有机硅改性丙烯酸酯乳液(硅丙乳液)。
3.
Study was made of silicone-acrylate emulsion polymerized with silicone intermediate system of D4/MMvi andarchitectural coating prepared with it.
本文主要研究了八甲基环四硅氧烷(D4)/四甲基二乙烯基硅氧烷(MMvi)体系的有机硅中间体制备相应硅丙乳液及其硅丙涂料,考察了不同有机硅形式、不同的有机硅加入量对乳液性能和涂料漆膜性能的影响。
4) pure acrylic emulsion
纯丙乳液
1.
Reseacrh on synthesis of pure acrylic emulsion for coating;
涂料用纯丙乳液合成的研究
2.
A pure acrylic emulsion with "soft core and hard shell" core-shell structure has been prepared by seed emulsion polymerization in semi-continuous process.
利用半连续法种子乳液聚合工艺制备具有软核硬壳核壳结构的纯丙乳液,并用红外光谱、激光粒度测试仪、高倍显微镜等对乳液的性质与结构进行表征。
5) styrene-acrylic emulsion
苯丙乳液
1.
Influence of functional monomer on styrene-acrylic emulsion performance;
功能单体对苯丙乳液性能的影响
2.
Study of styrene-acrylic emulsion modified by double-bond tetra-coordinated silicon;
含四配位硅的烯类单体改性苯丙乳液的研究
6) styrene/acrylic emulsion
苯丙乳液
1.
Vinyltrimethoxysilane was used in polymerization of styrene/acrylic emulsion,the property of emulsion was measured.
用乙烯基三甲氧基硅烷与苯乙烯、丙烯酸酯共聚合成苯丙乳液,对乳液性能进行了检测,并用傅里叶红外光谱对乳液化学结构进行了表征,证明乙烯基三甲氧基硅烷参与了共聚物的合成。
2.
By means of orthogonal testing and overall merit assessment,the influence of polymerization process of the multiple styrene/acrylic emulsion system,monomers for copoly meri.
以苯乙烯和丙烯酸丁酯作为主要单体,甲基丙烯酸及甲基丙烯酸甲酯作为必要成分,采用过硫酸盐作引发剂,在乳化剂作用下进行聚合制得苯丙乳液。
3.
Styrene(ST) as hard monomer, butyl acrylate(BA) as soft monomer, A and B as functional monomers, styrene/acrylic emulsion was synthesized by semicontinuous emulsion polymerization.
以苯乙烯为硬单体,丙烯酸丁酯为软单体,单体A和单体B为功能性单体,采用半连续乳液聚合法合成苯丙乳液,对乳液合成条件进行了研究,对乳液和浸渍后汽车工业滤纸性能进行了检测、分析。
补充资料：苯丙乳液
苯丙乳液是由苯乙烯和丙烯酸酯单体经乳液共聚而得。乳白色液体，带蓝光。固体含量40～45％，粘度80～1500mPa·s，单体残留量0.5%，PH值8～9。苯丙乳液附着力好，胶膜透明，耐水、耐油、耐热、耐老化性能良好。
苯丙乳液用作纸品胶粘剂，也可与淀粉、聚乙烯醇、羧甲基纤维素钠等胶粘剂配合使用。贮存于5～30 ℃的库房内，贮存期1年。
苯丙乳液用作纸品胶粘剂，也可与淀粉、聚乙烯醇、羧甲基纤维素钠等胶粘剂配合使用。贮存于5～30 ℃的库房内，贮存期1年。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条