1) model project of support
模板支撑方案
2) supporting scheme
支撑方案
1.
On design and construction elements of structural transformation layer s supporting scheme;
浅谈结构转换层支撑方案的设计及施工要点
2.
Combined with general condition of a certain grain storage engineering,the author introduces its construction technologies,analyzes the measures to increase engineering quality in the construction from formwork and supporting scheme,and construction control of pre-stressed beam,and proves by practices that the measures are feasible,in order to offer a reference for other similar engineering.
结合某粮库工程概况,介绍了其施工工艺,从模板及支撑方案、预应力梁的施工控制两方面分析了施工中提高工程质量的改进措施,实践证明,改进措施是可行且有效的,同时为其他类似工程提供了参考借鉴。
3) formwork supporting
模板支撑
1.
The technology measures about transfer floor thick plate of Tongzhou Wanhao Apartment in Jiangsu were introduced including formwork supporting,assembling reinforcement and installation,concrete pouring and control of mass concrete cracks,which can ensure concrete construction quality.
着重介绍江苏通州万豪公寓转换层厚板模板支撑、钢筋绑扎与安装、混凝土浇筑及大体积混凝土裂缝控制等技术措施,从而保证了混凝土的施工质量。
2.
In this paper,according to construction characteristics of high-rise building conversion layer,construction technology measures are taken to ensure the security of formwork supporting structure and bottom concrete structure,and the quality control of mass concrete casting in conversion layer.
针对高层建筑结构转换层施工的特点,采取一些相应的施工技术措施来保证模板支撑结构和下部混凝土结构的安全,保证转换层大体积混凝土的浇筑质量。
4) formwork support
模板支撑
1.
The design of 2.5 m large volume concrete formwork support in some medical technology building;
某医技楼2.5m厚大体积混凝土模板支撑设计
2.
Discussion on common safety problems of fastener-type steel tubular formwork supporting system;
钢管扣件式模板支撑系统常见安全问题初探
3.
The system of formwork support for 11000M oval-shape digester;
11000M~3卵形消化池的模板支撑体系
5) template supporting
模板支撑
1.
This paper introduces the application of fastener scaffold with steel pipe in template supporting system with long -span beam.
本文主要通过工程实例介绍扣件式钢管脚手架在高大跨度梁板模板支撑中的应用,并根据有关规范规定、现场实际情况及现有材料等,结合实践经验对其进行探讨和总结。
2.
In the construction of 2m thick slab-type structural change-over floor, we place an emphasis on solving the template supporting system, reasonable placement sequence of steel reinforcement, treatment of horizontal construction, protection of concrete cracking etc.
在2m厚板的结构转换层施工中,重点解决了模板支撑系统、合理安排钢筋就位次序、水平施工缝处理、混凝土防裂等难题,采用“斜面分层布料、薄层浇注振捣、分层浇筑成型”的方法浇筑大体积混凝土,严格控制混凝土内外温差,使板式结构转换层支撑系统稳定可靠,温差控制效果及混凝土观感质量好,无结构性裂缝。
6) follow board support
模板支撑
1.
Construction technology of follow board support for rib floor;
密肋楼板模板支撑的施工技术
补充资料：多孔陶瓷支撑体膜
分子式：
CAS号：
性质：在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米，外径孔径一般为0.1～0.5μm，个别也有厚度达3～5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是：用电机带动陶瓷支撑体旋转，当溶胶液(膜材料)滴落在支撑体上，就会迅速地敷覆到支撑体表面，待溶剂蒸发、凝胶化和干燥成膜后，经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。
CAS号：
性质：在多孔陶瓷体上附着的微孔陶瓷膜层。膜层厚度一般在几微米到几十微米，外径孔径一般为0.1～0.5μm，个别也有厚度达3～5μm、孔径10μm的。多采用氧化铝、二氧化钛和二氧化锆等作膜材料。制法是：用电机带动陶瓷支撑体旋转，当溶胶液(膜材料)滴落在支撑体上，就会迅速地敷覆到支撑体表面，待溶剂蒸发、凝胶化和干燥成膜后，经热处理而制成氧化物薄膜。现已为食品(含饮料)、医药、生物技术和环境保护等领域开发利用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条