1) loose abrasion
松动磨损
2) loosening damage
松动损伤
3) sliding wear
滑动磨损
1.
Study on sliding wear properties of thermal sprayed NiCrBSiWCe coating;
NiCrBSiWCe合金粉末喷熔层滑动磨损特性研究
2.
Study on sliding wear performance of TiC-Ni coatings prepared by reactive high velocity oxy-fuel flame spraying;
超音速火焰喷涂合成TiC-Ni涂层滑动磨损性能研究
3.
Distribution law of wear particle group in sliding wear process;
滑动磨损磨粒群的分布规律
4) fretting wear
微动磨损
1.
Study of fretting wear behavior of K417 nickel base superalloy;
K417镍基高温合金微动磨损行为的研究
2.
Fretting wear behavior of CuS nanoparticles in urea grease was studied in fretting wear tester.
在微动磨损试验机上考察了含有硫化铜纳米粒子脲基脂的微动磨损性能。
3.
The microstructure and microhardness of the joints were tested by means of optical microscope and microhardness tester,the fretting wear behavior of substrate and surfaced metals in room temperature were investigated on a PLINT fretting wear test rig.
用光学显微镜和显微硬度计对堆焊金属的显微组织和显微硬度进行了分析,用PLINT型微动磨损试验机考察了基体材料及堆焊层金属在室温条件下的微动磨损行为。
5) rolling wear
滚动磨损
1.
The wear properties of four kinds of high-vanadium high-speed steel with different carbon content were tested on a self-made rolling wear machine.
利用自制的滚动磨损试验机,测试了4种高钒高速钢的磨损性能,利用回归方法建立了磨损量关于循环次数和基体中碳含量的二元方程模型。
2.
Compared with high-chromium cast iron,the rolling wear properties of high-vanadium high-speed steel(HVHSS) were studied on the self-developed wear testing machine,and the failure mechanism was analyzed via electron microscope.
以高铬铸铁为参照,在自制的模拟轧辊磨损试验机上研究了高钒高速钢的滚动磨损性能。
3.
Rolling-sliding friction and wear behavior and effect of carbon content on rolling wear of wheel steel were investigated by a reciprocating rolling test apparatus on tesion-compression hydraulic machine with a high precision.
结果表明:在不同滚滑状态下摩擦副之间的摩擦力不同,平面试样的表面磨痕形貌随着不同的切向摩擦力而明显不同,随着切向摩擦力的增大滚动磨损机制亦发生改变,剥离磨损加剧且磨损深度变大,当相对滑动量增大到一定程度后,磨损表现为明显的剥层机制;碳含量对车轮钢的滚动磨损表面磨痕形貌影响显著,碳含量低时磨痕以犁沟为主,碳含量高时剥离磨损发生的概率增加。
6) vibratory wear
振动磨损
1.
The abrasion resistance of coal mining machine bit tooth,was adopted self-regulating test bed of unconsolidated abrasive vibratory wear and ordinary fixed abrasive wear,abrasion resistance of bit from different factory was analysed.
采煤机截齿齿体耐磨性直接影响截齿使用寿命,采用自制的散体磨料振动磨损试验机与普遍使用的固定磨料磨损试验机,对国内外几个厂家截齿齿体耐磨性进行对比分析。
补充资料：料仓松动器
分子式：
CAS号：
性质：又称料仓抖动器。使料仓底面振动的料斗。它是一种锥形料斗，用橡胶衬套连杆从料仓或料斗上悬挂下来，紧靠在料仓开口的下面或料斗的下面安装，振动料斗进口与其上面的料仓以及下面的供料装置等用橡胶带连接和密封起来。振动料斗上安装了电机驱动的偏心重块，使它在水平面上按椭圆轨迹旋转。频率可由偏心重块的旋转速度来调整，振幅随偏心重块的位置而变化。
CAS号：
性质：又称料仓抖动器。使料仓底面振动的料斗。它是一种锥形料斗，用橡胶衬套连杆从料仓或料斗上悬挂下来，紧靠在料仓开口的下面或料斗的下面安装，振动料斗进口与其上面的料仓以及下面的供料装置等用橡胶带连接和密封起来。振动料斗上安装了电机驱动的偏心重块，使它在水平面上按椭圆轨迹旋转。频率可由偏心重块的旋转速度来调整，振幅随偏心重块的位置而变化。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条