1)  module
模化块
2)  modeling
模化
1.
This paper is useful for organizing the modeling tests using the same working fluids and selecting the decisive similarity criteria using different ones.
在自行开发的以一元流动理论为基础的透平膨胀机性能预测方法的基础上，经过推导，获得了透平膨胀机使用同种工质时的决定性相似准则，即特性比、膨胀比及叶轮进口圆周马赫数中的任意两个，为组织同种工质的模化试验，也为进一步研究透平膨胀机使用不同种工质时决定性相似准则的选取奠定了基础。
2.
Based on inquiry into the effective research of certain circular charge against casestructure and its modeling principl, the relevant modeling test and original model confirmation are carried out to solve the question of explosive similar theory in complex structures.
结合某环形装药对箱体结构的效应研究及其模化准则的探讨，进行了相应的模型试验及原型验证，解决了爆炸相似理论在复杂结构中的应用问题，可供类似问题的模化研究参考。
3)  Simulation
模化
1.
Present the basic similarity simulation principle followed in cold simulation of power plant boiler dynamic field, way of calculating test control parameters and associated measuring techniques.
介绍了电站锅炉空气动力场的冷态模化的基本相似模化原理、试验控制参数的计算方法及相关的测量技术。
4)  cold modeling
冷态模化
1.
The paper gives an brief analyse about the field of temperature and velocity in a kiln model based on cold modeling calculation,and analyzes the influences on the flow field as correlative parameters such as structure,flow ratio are different.
本文在三通道燃烧器窑内冷态模化计算基础上,进行了窑内速度场、温度场测量,并根据测量数据及计算,分析了几种典型回转窑多通道燃烧器结构参数对窑内流场的影响,通过分析窑内流场空气动力特性,比较了燃烧器不同结构参数对窑内气流混合、燃烧过程及火焰形状的作用,为今后进一步进行新型燃烧器设计提供参考。
5)  large-scale
规模化
1.
Some essential conditions for the large-scale breeding of Kallima inachus Doubleday were studied,including the spatial need and the supplementary nutrients for reproduction,and those for egg hatching,larva growing and pupa emerging.
通过对成虫繁殖的空间条件、补充营养、卵期保育和幼虫饲育技术等的研究,找出了枯叶蛱蝶规模化繁育中的关键条件。
2.
This review gives the progress of extraction and purification technologies of phycocyanin from Spirulinda, summarizes the problems in phycocyanin production from Spirulinda and looks forward to the future of large-scale production of phycocyanin.
本文综述了国内外螺旋藻中藻蓝蛋白的规模化提取和纯化技术的研究进展,总结了螺旋藻藻蓝蛋白生产存在的问题,展望了藻蓝蛋白规模化生产的前景。
3.
This paper proposed that the community support realize industrialization,specialization and large-scale with the Government leadership.
关于社区养老服务的发展方向问题,本文认为应在政府的政策指导下走产业化、专业化、规模化的道路,构建一个适合我国国情的完善的社区养老服务模式。
6)  scaled
规模化
1.
The Dielectric Effect in Scaled DBD and Optical Emission Spectroscopy Diagnosis of DBD;
规模化DBD等离子体源中的介电效应与光谱诊断
2.
Aiming at investigation and statistic data of laying hens, chicken, pig, cattle, sheep, the characteristic and pollutant emission amount of scaled livestock and poultry were taken and pollutant prevention countermeasures were put forward.
以规模化畜禽养殖业为调查对象,主要调查统计了蛋鸡、肉鸡、猪、肉牛、奶牛、羊。
3.
But existing plasma resources can t be used in situation of needing scaled plasma because of their limited sca.
阻碍规模化DBD等离子体源发展的主要问题之一是DBD系统的运行频率很低而导致的功率输出不高。
参考词条
补充资料：五金模中滑块常用的形式
五金模中滑块常用的有如下几种﹕
 1 适用于中小形滑块﹐依靠滑块的垂直边限位(如图1)﹔
 2 适用于以共享方式加工的大型滑块﹐限位块采用入块形式(如图2)﹔
 3 适用于需快速装卸的大中型滑块﹐依靠滑块底部的限位板限位(如图3)﹔
 4 适用于需要滑块在接触料片前先复位的场合﹐靠滑块中的顶料销作用﹐先将滑块复位﹐顶料销长度通常为7mm﹐浮出端面2.0mm﹐选用红色扁线弹簧。(如图4)
 5 适用于要求中间垂直p上下运动﹐左右滑块水平运动的块合﹐中间滑块依靠内导柱导向﹐左右滑块用等高套筒限位﹐等高套筒长度取夹板厚度加0.5mm。(如图5)

说明：补充资料仅用于学习参考，请勿用于其它任何用途。