1) roller hearth furnace unit
辊底式固溶处理炉
1.
While developed countries often reconstruct and expand the system by adding the highly technological roller hearth furnace unit as its core.
工业发达国家多是改扩建,而在发展中国家则多是新建项目,改扩建内容的核心是增加高技术的辊底式固溶处理炉。
2) Roller-hearth heat treatment furnace
辊底式热处理炉
1.
In order to improve the steel plate temperature prediction accuracy of the roller-hearth heat treatment furnace,GA-BP neural network is trained by a great deal of actual data.
为了提高辊底式热处理炉的钢板温度预报精度,采用了遗传神经网络的方法,运用大量的现场实际数据进行训练和仿真,建立了钢板温度预报模型,并应用于计算辊底式热处理炉钢板温度的数学模型中。
3) roller hearth furnace
辊底式炉
1.
The paper introduces the technological process and arrangement of the production line of hightemperature roller hearth furnace.
文章介绍了高温辊底式炉生产线的工艺流程及布置 ,着重介绍了高温辊底式炉的炉体结构、炉辊选型及保证其质量和安全使用的措施以及炉温控制
2.
The paper discusses the design and operation of the gas safety and explosion protection system of roller hearth furnace in detail.
较详细地讨论了辊底式炉煤气安全防爆系统的设计与操作。
3.
The authors describe the constituent of hydraulic control system and the design of PLC software for some large roller hearth furnace with PLCs as its control centre for annealing bearing races.
叙述了某大型辊底式炉在轴承套圈余热退火过程中，采用可编程控制器（ＰＬＣ）作为控制核心，自动进行工作的机械液压传动控制系统的组成、ＰＬＣ软件设计及编制。
4) Car bottom heat treatment furnace
车底式热处理炉
5) underfired furnace
热底式热处理炉
6) solution heat treatment
固溶处理
1.
The effects of solution heat treatment processes on the microstructure and mechanical properties of the spray deposited 7090/SiC_P composite were investigated.
研究了固溶处理工艺对喷射沉积7090/SiC_p铝基复合材料的显微组织和力学性能的影响。
2.
It is thereby shown that the spinning and bulging forming can be done successfully, when taking four paths stepped spinning process, non-completed solution heat treatment (460℃±10℃ 30 min quenching by water) before spinning and completed solution heat treatment (515℃±10℃ 15 min quenching by water) before bulging for 6061.
结果表明,以6061铝合金为材质,采取4道次错距强旋成形工艺以及旋压前进行不完全固溶处理[(460±10)℃ 30 min、水淬]、胀形前进行完全固溶处理[(515±10)℃15 min、水淬],可确保旋压及胀形过程顺利进行,壳体的凹槽形状、尺寸精度、力学性能以及表面质量均可得到有效的保证。
3.
To dissolve the intermetallics which precipitated from the matrix of the layer, a solution heat treatment is conducted.
采用双层辉光离子渗金属技术 ,首先在低碳钢表面渗入合金元素钨、钼 ;然后作固溶处理 ,使金属间化合物溶于基体中 ;接着渗碳 ,使合金层内形成大量弥散、均匀、细小的合金碳化物。
补充资料：钢板辊底式热处理炉(舞阳钢铁公司)
钢板辊底式热处理炉(舞阳钢铁公司)
钢板辊底式热处理炉(舞阳钢铁公司)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条