1) Bending loss of waveguide
波导弯曲半径
2) bending radius
弯曲半径
1.
The design of the Decorative Stainless-Steel Elbow, the calculation of the thinnest thickness of the elbow wall, and the calculation of the smallest relative bending radius of the elbow, the forming die for the elbow and the attention items in the design of the die were introduced.
介绍了不锈钢装饰弯头的设计、弯头最小壁厚的计算、弯头最小相对弯曲半径的计算 ,并介绍了弯头成形模以及模具设计中应注意的问题。
2.
The strained lattice parameters, misorientation, bending radius and stress of ZnO films were estimated.
高温直接生长的样品弯曲半径小而应力更大;实验测量的应力值和理论计算的热应力值之间存在差异,原因主要是晶格失配应力的存在。
3) bend radius
弯曲半径
1.
Experiments of single mode fiber bend loss with the change of bend radius from 1 to 9 mm are made at 90° and 180°respectively.
系统对单模光纤弯曲损耗随弯曲半径(1~9 mm)进行90°和180°的弯曲实验,结果显示,光纤弯曲损耗随弯曲半径的增加呈下降趋势,光纤弯曲对不同波长的光损耗不同,且出现弯曲损耗的振荡,并进行了数值仿真和实验数据的比较。
2.
Based on field data of the river bend in middle and lower Hanjiang River and in Jingjiang River,the relation between the variation of bend radius of flow dynamic axis and bend bypassing and shoal cutting is expounded.
在分析汉江中下游以及荆江河湾实测资料的基础上,阐述了河湾水流动力轴线弯曲半径变化与切滩撇弯之间的关系,大量相关实测资料说明当河湾的来水条件和河湾形态发生变化时,会造成河势与水流动力轴线走向发生变化,从而引起切滩撇弯的发生。
4) curve radius
弯曲半径
1.
Through analyzing and arranging the actual data measured of mountain area rivers in southwest of China,we summarize:The ideal channel flow route should have sine derivative curve flow route,harmonized flow direction,good flow route corner and bigger curve radius.
通过对西南地区山区河流实测资料进行分析整理 ,总结出 :正弦派生曲线水流线路、协调的水流方向、良好的水流转向角及较大的弯曲半径为理想的航道水流流路 ,并提出了该规律在工程设计中的应
5) bended waveguide
弯曲波导
1.
It is feasible when appling the method in the simulation of large-scale bended waveguide.
将之应用于光波导的计算机仿真中,并对弯曲波导进行了数值模拟以验证方法可行性。
6) bent waveguide
弯曲波导
1.
Characteristics of light propagating in a bent waveguide were analyzed by using the wide angle BPM based on (2,2) Padé approximation.
用(2,2)阶Padé近似的广角BPM对光在弯曲波导中的传输特性进行了计算和分析,获得了比近轴BPM更精确的结果。
2.
According to the numerical study of the mode converters in smooth bent, circular waveguides on high-power millimeter waves TM 01 -TE 11 , the geometrical dimensions of the bent waveguides are optimized in this paper.
在数值研究高功率毫米波 TM0 1—TE11光滑弯曲圆波导模式变换的基础上 ,对弯曲波导的几何结构进行了优化分析。
补充资料：弯曲半径
分子式：
CAS号：
性质：从弯曲体的内表面测量的一个弯曲的试样或零件的曲率相对应的半径。
CAS号：
性质：从弯曲体的内表面测量的一个弯曲的试样或零件的曲率相对应的半径。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条