1) silicon carbide/silicon nitride ceramic
碳化硅/氮化硅陶瓷
2) silicon carbonitrides ceramics
碳氮化硅陶瓷
3) silicon nitride ceramics
氮化硅陶瓷
1.
As a new type tool material, the excellent capabilities of silicon nitride ceramics cutting tools ravel out many cutting problems of super hard materials.
氮化硅陶瓷是一种新型刀具材料,其优良的切削性能解决了超硬材料的加工难题。
2.
The dielectric property of silicon nitride ceramics was measured at 10.
通过添加烧结助剂,采用常压烧结工艺制备出不同气孔率(19%～54%)的氮化硅陶瓷。
3.
Silicon nitride ceramics is a sort of material of high temperature and high intensity structure which have been developed since 1950s.
氮化硅陶瓷是50年代发展起来的一种高温高强结构材料,由于其优异的高温力学性能和化学稳定性,在现代制造业中发挥着越来越重要的作用。
4) silicon nitride ceramic
氮化硅陶瓷
1.
However,it is difficult to make silicon nitride ceramic parts.
氮化硅作为高温功能陶瓷性能优越,但将其制备成陶瓷零件比较困难,目前一般用反应烧结法制备氮化硅陶瓷零件。
2.
In the paper, the dispersion of nano-Si3N4 powder, the influence of different nano-Si3N4 concentration on silicon nitride mechanical properties, the influence of the different nano-Si3N4 concentration on silicon nitride ceramic using properties, th.
本文以亚微米级氮化硅为起始原料,加入纳米氮化硅来增强基体,添加氧化铝和氧化钇为烧结助剂,等静压成型,采用无压烧结的方式来制备具有优良性能的氮化硅陶瓷。
3.
In this paper, the influence of sintering technology on the microstructure and mechanical properties of the silicon nitride ceramic were studied.
研究了烧结技术对氮化硅陶瓷显微结构和力学性能的影响。
5) silicon nitride
氮化硅陶瓷
1.
Hard and wear-resistant titanium nitride coatings were deposited by pulsed high energy density plasma technique on silicon nitride ceramic cutting tools at ambient temperature.
用高能量密度脉冲等离子体于室温下在氮化硅陶瓷刀具上成功沉积了高硬耐磨的氮化钛涂层。
2.
The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied.
研究了保温时间对气压烧结(GPS)氮化硅陶瓷晶界相及力学性能的影响。
6) Si 3N 4 ceramics
氮化硅陶瓷
1.
Bonding of Si 3N 4 ceramics was performed with Y 2O 3 Al 2O 3 SiO 2(YAS) X glass solders, which were mixed with TiO 2 (YT) and Si 3N 4(YN) respectively.
在Y2 O3 Al2 O3 SiO2 (YAS)钎料中添加TiO2 (YT)和Si3N4(YN) ,并进行氮化硅陶瓷的连接。
2.
Si 3N 4 ceramics die was prepared by the method of reaction bond,and tests of drawing stainless steel (SUS304) with ceramics die lubricated with water base drawing lubricator have been carried out in YA-100 type drawing machine with four columns.
用反应烧结方法制备氮化硅陶瓷材料模具 ,然后将其安装在YA - 1 0 0型四柱液压拉深机上进行拉深不锈钢实验。
补充资料：碳化硅晶须补强氮化硅陶瓷复合材料
分子式：
CAS号：
性质：指将碳化硅(SiC)晶须加到氮化硅(Si3N4)陶瓷中所制造出的复合材料。加入晶须后，氮化硅陶瓷的烧结致密化的难度增加，所以，含有晶须的氮化硅材料，一般采用热压或者热等静压烧结法等加压烧结方法。在氮化硅陶瓷中加入10％～30％(体积)的SiC晶须后，断裂韧性可以提高30％～100％，最高值可达到12.5MPa·m1/2。晶须增韧后的氮化硅陶瓷，由于韧性好，使用可靠性好，在热机用陶瓷部件、各种需要耐高温的高强度部件等工程材料领域具有广泛的用途。晶须增韧氮化硅复合材料刀具和刃具也有很大市场潜力。
CAS号：
性质：指将碳化硅(SiC)晶须加到氮化硅(Si3N4)陶瓷中所制造出的复合材料。加入晶须后，氮化硅陶瓷的烧结致密化的难度增加，所以，含有晶须的氮化硅材料，一般采用热压或者热等静压烧结法等加压烧结方法。在氮化硅陶瓷中加入10％～30％(体积)的SiC晶须后，断裂韧性可以提高30％～100％，最高值可达到12.5MPa·m1/2。晶须增韧后的氮化硅陶瓷，由于韧性好，使用可靠性好，在热机用陶瓷部件、各种需要耐高温的高强度部件等工程材料领域具有广泛的用途。晶须增韧氮化硅复合材料刀具和刃具也有很大市场潜力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条