1) Hierarchical porosity
多层次孔
2) porous layer
多孔层
1.
It is proved that alumina nano-fibers are formed from the porous layer, while totally different behaviors of the barrier layer a.
结果表明,纳米氧化铝纤维是在阳极氧化铝的多孔层形成的,且在浸溃过程中阻挡层和多孔层表现出完全不同的溶解趋势。
2.
the ionic migration control and the formation of porous layer.
经过理论计算并通过试验证明，恒压下铝的阳极氧化过程是由三个阶段组成，第一是隧道效应控制过程；第二是离子迁移控制过程；第三是多孔层的形成与生长过程。
3.
Experiments on boiling heat transfer from a mechanically fabricated porous layer atatmospheric and superatmospheric pressures are conducted, the effect of system pressureare revealed.
、Thermoexcel－E、Ge、－T、CIT等多种高性能强化沸腾换热结构［‘－’］，其中ThermoexcelE型结构是机械加工多孔层中有代表性的一种，并进行了较多研究＊‘］。
3) porous film
多孔层
1.
The visible and stable ultraviolet-blue photoluminescence properties of silicon after the fade of the porous film;
硅多孔层分离后稳定的可见蓝紫光发射特性
2.
The rich oxided Si nanocrystallites were formed on the surface of the traditional electrochemically-produced samples after being peeled off the surface porous film in the marinade.
用电化学腐蚀方法制备了多孔硅样品,在浸泡液中浸泡使其表层多孔层与样品分离,在样品表面形成了丰富的SiO_2包裹纳米硅颗粒结构,研究了样品的光致发光(PL)特性。
3.
The Si nanocrystallites embedded in SiO 2 matrix framework is formed in the surface of the traditional electrochemically produced samples after being peeled off the surface porous film in the marinade.
将采用传统电化学腐蚀法制备的多孔硅样品,用浸泡液浸泡剥离其表层多孔层,使样品表面形成 SiO2 包裹纳米硅颗粒的结构,在表面镀半透明Au膜后制备成电致发光器件。
4) porous coating
多孔涂层
1.
Preparation and characterization of polyurethane porous coating;
聚氨酯多孔涂层制备与表征
2.
In order to modify the surface biologic characteristics of 316L stainless steel, based on the theory of phase inversion, we prepared PU compact and porous coatings in the help of water vapor.
利用扫描电子显微镜(SEM)观察样品的表面形貌,着重研究了湿度和浓度对多孔涂层表面形貌、孔径尺寸和孔面积百分比的影响。
5) Lamilloy
多孔层板
1.
Lamilloy research attracts increasingly the attention of aeronautical powerplant engineers, both in China and abroad.
在大尺寸低速风洞中采用红外热成像仪对 3种应用于涡轮叶片的典型多孔层板结构进行了冷却有效性的实验研究 ,通过开发的红外热像仪程序包获得了层板表面详细的壁温分布和冷效分布 ,运用参数分析了层板结构参数对其冷却有效性的影响。
2.
Lamilloy is considered as a promising cooling concept which can meet the high cooling effectiveness with low cooling air consumption.
全气膜多孔层板冷却技术集冲击冷却、对流冷却、气膜冷却为一体,具有消耗冷气量少、冷却效率高的优点,具有很广阔的应用前景。
3.
The resistance and cooling characteristic of lamilloy were investigated with experimental and numerical simulation in this paper.
多孔层板冷却技术是一种新型冷却技术,集冲击、对流和气膜冷却于一体,具有冷气消耗量小,冷却效率高的特点,在国外的应用越来越广泛。
6) porous layer
多孔涂层
1.
Considered the liquid transverse suction effect at the porous layer interface,mathematical models was presented to investigate the influences of the porous layer charac-teristic parameters on condensation heat transfer.
研究多孔涂层界面抽吸效应对强化膜状凝结换热的影响。
补充资料：多层次三原色印花
多层次三原色印花 利用染料的三原色，通过采用连续雕刻法（通称为影写版法）雕刻的浅花筒，在滚筒印花机上叠色印花，从而获得色泽鲜艳、多种层次、类似拍摄花卉印花效果的一种印花工艺方法。这种工艺印花方法要求织物表面平细，否则效果不佳。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条