1) ladle micro-alloying
包内微合金化
1.
The technology of ladle micro-alloying for glass mould material was studied,and the graphite shape,matrix,eutectic colony,hardness and oxidation resistance properties of the mould material treated by alloying was compared with that by original process.
结果表明:经过炉前包内微合金化处理的玻璃模具材质石墨形态明显改善,基体组织中珠光体数量增多且片层间距细小,共晶团组织细小且数目增多,促使碳化物的形成,提高耐热相的稳定性,从而使玻璃瓶模具材质的硬度提高、抗氧化性能明显改善。
2) microalloying
微合金化
1.
Application of V-microalloying Technology in Producing HRBL600 Reinforced Bar;
钒铁微合金化工艺在HRBL600钢筋生产中的应用实践
2.
The effect of V,N,Nb microalloying on the microstructure and properties of containing strip rolled from thin slab;
V、N、Nb微合金化对薄板坯连轧带钢组织和性能的影响
3.
Development History of Nb-microalloying Technology and Progress of Nb-microalloyed Steels;
Nb微合金化和含铌钢的发展及技术进步
3) microalloy
微合金化
1.
A Study on Rare Earth Metal Microalloying of Alloy Steel;
合金钢的稀土金属微合金化研究
2.
Technical Study on Electromagnetic Casting and Microalloy of High Strength Aluminum Alloys;
高强铝合金微合金化与电磁成型技术的研究
3.
The core of the new manufacturing process for the high quality upgraded Manganese steel is fractionation modification,composite inoculation and microalloying technique,which are affected each other.
优质改性高锰钢生产新工艺的核心是将分级变质处理、复合孕育处理和微合金化技术三位一体,互为作用。
4) Micro-alloying
微合金化
1.
Effects of micro-alloying with Sc and Ti on the microstructure and mechanical property of Al-Mg based alloys;
复合微合金化对Al-Mg合金组织与性能的影响(英文)
2.
Analysis and Study of Steel Plate with Nb Micro-alloying;
Q345中板加Nb微合金化生产工艺分析与研究
3.
Micro-alloying and Controlled Rolling of X70 Steel with Less Pearlite used for Pipeline;
少珠光体管线用钢X70的微合金化及控制轧制
5) Microalloyed
微合金化
1.
A high performance tobacco stem untying tool has been developed based on a microalloyed high-carbon low-alloy tool steel and its low-temperature secondary hardening technique.
研制出一种微合金化高碳低合金工具钢及其低温二次硬化工艺技术,其主要力学性能达到国际先进水平,由此研制生产出可替代进口的高性能烟叶解把刀,其主要使用性能及性价比明显超过国外进口产品。
2.
The continuous cooling transformation of microalloyed low carbon bainitic steel after ausforming was investigated by using a Gleeble 1500 thermomechanical simulator.
利用Gleeble 1500热模拟试验机研究了微合金化低碳贝氏体钢形变连续冷却转变行为,并采用OM和TEM分析了冷却速度对组织的影响规律。
6) micro alloying
微合金化
1.
The cleanliness of the steel has been improved by adoption of such a few processes as Nb-V-Ti micro alloying, controlled rolling and accelerated cooling as well as adjustment of micro alloy elements and argon bubbling, and the morphology of sulphide changed by Ca treatment; and segregation of elements in steel reduced and the toughness of the steel raised by implementation of appropriate contin.
该钢采用Nb-V-Ti微合金化加控轧控冷的生产工艺。
2.
The comprehensive properties of steel plate, particularly the low temperature impact toughness of the steel plate have been dramatically improved by proper design on te chemical compostions and adoption of micro alloying, control rolling and accelerated cooling technologies in view of the practical conditions of stee.
通过对化学成分的合理设计及制订适合该厂冶炼、连铸、轧制的工艺 ,采取微合金化和控轧控冷相结合的有效技术措施 ,提高钢板的综合性能 ,特别是低温冲击韧性。
3.
The development of non quenched and tempered free cutting steel 30MnVS for saloon cars was successful with the use of some technologies such as adding S by wire feeding in electric furnace,micro alloying,argon stirring in ladle etc The impact toughness is increased with S content increase
通过电弧炉喂硫线技术、微合金化技术、包底吹氩技术成功的开发了轿车用易切削非调质钢30 Mn VS,各项性能检测表明 ,随着硫含量的提高 ,冲击功将增
补充资料：机械合金化高温合金管材和方型材
机械合金化高温合金管材和方型材
机械舍金化高温合金管材和方型材
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条