说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 聚合物非等温结晶动力学
1)  Kinetics of non-isothermal crystallization of polymer
聚合物非等温结晶动力学
2)  non-isothermal crystallization kinetics
非等温结晶动力学
1.
Non-isothermal Crystallization Kinetics of Silica/MC Nylon 6 In-situ Nano-scale Composites;
纳米二氧化硅/MC尼龙6原位复合材料非等温结晶动力学的研究
2.
The non-isothermal crystallization kinetics of polypropylene(PP) and polypropylene(PP)/anhydrite composites were investigated by means of DSC.
采用DSC研究了聚丙烯(PP)及聚丙烯/硬石膏复合材料的非等温结晶动力学,对所得数据用修正Avrami方程的Jeziorny法和Mo法进行处理。
3.
Differential scanning calorimetry(DSC) was introduced on relevant non-isothermal crystallization kinetics,and the modified Avrami analysis showed that the Avrami exponent varies from 2.
非等温结晶动力学研究采用DSC方法,改进的Avrami方程可以很好地分析s-PB非等温结晶过程的主期结晶,表明其结晶过程是自成核,三维球形生长。
3)  nonisothermal crystallization kinetics
非等温结晶动力学
1.
The nonisothermal crystallization kinetics of PLA plasticized with PEG of different molecular mass were studied by DSC at various scanning rates.
采用DSC方法对聚乙二醇(PEG)增塑聚乳酸的非等温结晶动力学进行了研究。
2.
The nonisothermal crystallization kinetics of polyphenylene sulfide(PPS)poly- amide 6(PA6)blends was investigated by differential scanning calorimetry(DSC).
用差示扫描量热仪(DSC)研究了聚苯硫醚(PPS)/尼龙6(PA6)的非等温结晶动力学。
3.
The nonisothermal crystallization kinetics of Poly(butylenes terephthalate)(PBT) /Glass Fiber/nano-Al_2O_3 composites was investigated by differential scanning calorimetry(DSC).
利用差示扫描量热仪(DSC)研究了纳米A l2O3粒子对纳米A l2O3/GF/PBT复合材料非等温结晶动力学的影响。
4)  crystallization kinetics in polymers
高聚物的等温结晶动力学
5)  isothermal crystallization kinetics
等温结晶动力学
1.
Study of Isothermal Crystallization Kinetics of MC Nylon 6/TiO_2 In-situ Nano-meter Composite;
MC尼龙6/TiO_2原位纳米复合材料等温结晶动力学的研究
2.
Study on isothermal crystallization kinetics of rare-earth fluorescent PA6;
稀土荧光PA6等温结晶动力学的研究
3.
The isothermal crystallization kinetics of neat PP and PP/s-PB blends was studied using differential scanning calorimetry.
利用Avrami方程研究了聚丙烯(PP)及PP/间同1,2-聚丁二烯(s-PB)共混物的等温结晶动力学。
6)  kinetics of isothermal crystallization
等温结晶动力学
1.
The crystallization behavior, morphology and kinetics of isothermal crystallization of PTT, PET and their blend (mass ratio 2575) were investigated using DSC and PLM.
利用差示扫描量热仪、正交偏光显微镜研究了聚对苯二甲酸丙二醇酯(PTT)、聚对苯二甲酸乙二醇酯(PET)及PTT/PET共混体系(质量比为25∶75)的结晶行为、形态和等温结晶动力学。
2.
The isothermal crystallization behavior of PP-g-MAH was measured using differential scanning calorimetry(DSC) and the kinetics of isothermal crystallization was analyzed with Avrami equation.
以差示扫描量热方法和Avrami模型分析聚丙烯/马来酸酐接枝物的等温结晶行为,分别考察了马来酸酐接枝率、接枝物降解程度和第二接枝单体结构对接枝物等温结晶动力学的影响。
补充资料:结晶动力学
分子式:
CAS号:

性质: 研究结晶物质的结晶形成方式和过程以及结晶速率对时间、温度和分子结构等影响因素的依赖关系。理论上,晶体生长动力学可用等温结晶的动力学关系式——Avrami方程来定量描述。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条