1) proteinous finishing agent
蛋白涂饰剂
1.
The modifications of casein, gelatin and other proteins as proteinous finishing agents are briefly summarized, and the modification methods and principles, as well as the resultant products properties are mainly presented.
主要概述了国内外在酪素、明胶等蛋白涂饰剂方面的改性研究状况,并对各种改性方法的原理及产品性能进行了简要的总结。
2) maxwhite
['mækswait]
白革涂饰剂
3) Protein modifier
蛋白质修饰剂
4) spray finish
喷涂涂饰剂
5) finishing agent
涂饰剂
1.
The preparation methods of acrylic modified aqueous polyurethane dispersion as leather finishing agent were reviewed, including co-mixture crosslinking, copolymerization emulsion, seed emulsion polymerization and interpenetrating polymer network polymerization.
综述了近年来丙烯酸酯改性水性聚氨酯(PUA)皮革涂饰剂的改性方法,包括共混交联法、溶液聚合法、种子乳液聚合法和互穿网络聚合法。
2.
A kind of aqueous polyurethane finishing agents were synthesized with isophorone diisocyanate(IPDI),polytetrahydrofuran(PTMG),dimethylolpropanoic acid(DMPA) as monomers and n-butylamine,ethylene glycol and ethylenediamine as chain-extension agents.
采用异佛尔酮二异氰酸酯(IPDI)、二羟甲基丙酸(DMPA)、聚四氢呋喃(PTMG)为原料制备聚氨酯预聚体,分别以乙二醇(EG)、乙二胺(EN)和正丁胺(n-butylamine)为扩链剂制备了水性聚氨酯皮革涂饰剂,研究了该涂饰剂所成膜的力学性能、断裂伸长率和吸水性。
3.
Collagen hydrolysate was used to modify the polyurethane finishing agent in different reaction stages.
经过该涂饰剂涂饰的皮革的透湿率较高,可达689mg/10cm2·24h。
6) finishing
[英]['finiʃiŋ] [美]['fɪnɪʃɪŋ]
涂饰剂
1.
The applicable effects of waterborne and solventborne UV curable leather finishing was compared and the micro-morphology of leather was observed and the air permeability was accurately calculated.
对比了水性与溶剂型UV皮革涂饰剂在皮革表面的应用效果,并对皮革表面微观性能及透气度进行了表征和计算。
2.
The prime finishing of cationic polyurethane emulsion for leather was prepared from diol polyether, 1,6-hexamethylene diisocyanate and cationic chain extended agent by prepolymerization , chain extended reaction, neutralization and emulsification.
6 六次甲基二异氰酸酯 ,聚醚和阳离子扩链剂为原料 ,通过预聚、扩链、中和和乳化获得水乳型阳离子皮革底层涂饰剂 ,在反应中就聚醚中K、Na含量 ,水含量和溶剂水含量对聚合物制备的影响进行了研究。
3.
Synthesis techniques of aqueous polyurethane for leather finishing and influencing factors on its properties were briefly introduced.
简述了水性聚氨酯人造革涂饰剂的合成工艺,并对影响其性能的基本因素进行了分析。
补充资料：涂饰剂
分子式：
CAS号：
性质：用于皮革表面美化、提高耐用性、修正粒面缺陷、提高商用价值，同时增加花色品种的各色浆液。由成膜剂、着色剂、涂饰助剂和介质等组成。可采用揩、刷、喷等方式施于革面，形成一层具有一定黏合强度和机械强度的薄膜。根据用途的不同，可分为底层涂饰剂、中层(颜料层)涂饰剂和顶层光亮层涂饰剂。根据介质不同分类，以有机溶剂为介质的涂饰剂为溶剂型涂饰剂(solvent finish)；以水为主要介质的涂饰剂为水基型涂饰剂(water based finish)。由于有机溶剂易燃、有毒，会对环境造成污染，故其使用受到限制。溶剂型涂饰剂已逐步被水基型涂饰剂所取代。
CAS号：
性质：用于皮革表面美化、提高耐用性、修正粒面缺陷、提高商用价值，同时增加花色品种的各色浆液。由成膜剂、着色剂、涂饰助剂和介质等组成。可采用揩、刷、喷等方式施于革面，形成一层具有一定黏合强度和机械强度的薄膜。根据用途的不同，可分为底层涂饰剂、中层(颜料层)涂饰剂和顶层光亮层涂饰剂。根据介质不同分类，以有机溶剂为介质的涂饰剂为溶剂型涂饰剂(solvent finish)；以水为主要介质的涂饰剂为水基型涂饰剂(water based finish)。由于有机溶剂易燃、有毒，会对环境造成污染，故其使用受到限制。溶剂型涂饰剂已逐步被水基型涂饰剂所取代。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条