1) double polymer slugs
双聚合物段塞
2) polymer slug
聚合物段塞
1.
Study on numerical simulation of polymer slug.;
聚合物段塞的数值模拟研究
2.
The effect of polymer slug on the oil displacement efficiency and economic benefit are studied on high-concentration(2500mg/L) and high molecular weight polyarylamide produced by Daqing oil field.
采用大庆油田助剂厂生产的相对分子质量为17×106 的聚丙烯酰胺,在质量浓度为 200 mg/L条件下,进行6个驱油实验,实验结果表明:随着聚合物段塞的增大,聚合物驱采收率增加,但段塞增大到一定值后,采收率增加的速率开始变缓;企业总利润开始随着聚合物段塞的增大而增加,但段塞增大到一定值后,企业总利润开始下降;企业最大总利润所对应的聚合物段塞随着油价的增加而增大;在总聚合物用量不变的条件下,阶梯段塞驱油效果略优于整体段塞。
3) amphiphilic block polymer
双亲嵌段聚合物
1.
To modify two immiscible polymers with the amphiphilic block polymers as compatibilizing agent was an effective method for the synthesis of polymeric alloy.
主要介绍了以活性阴离子聚合法和原子转移自由基聚合法合成双亲嵌段聚合物的方法、特点和影响因素 ,另外对双亲嵌段聚合物在聚合物共混体系中的增容作用作了评
4) polymer plugging
聚合物堵塞
1.
According to the characteristics of polymer injection well stop inject or uninject and oil well low flow rate because of polymer plugging in the polymer injection fault-block in Gudao oilfield,the efficient polymer blocking remover,DOC-8.
针对孤岛油田注聚区由于聚合物堵塞造成注聚井停注或欠注以及油井液量下降的情况,研制开发了高效聚合物解堵剂DOC-8。
5) diblock copolymer
嵌段聚合物
1.
Mesoscopic dynamics simulation of diblock copolymer:Morphology and kinetics;
介观动力学模拟嵌段聚合物:形貌与动力学
6) block polymer
嵌段聚合物
1.
The concept of macromonomer and the synthesis of hydrophilic macromonomer were introduced in this article, accompanied with the discussion on the application of macromonomer in graft copolymer, block polymer, polymeric nanosphere, biochemistry and medicine field.
阐述了自由基聚合、原子转移自由基聚合、生物合成等亲水性大分子单体合成方法,介绍了聚乙烯吡啶等一些重要的亲水性大分子单体的合成,论述亲水性大分子单体在聚合物分子设计和改性方面的作用及在合成接枝聚合物、嵌段聚合物、高分子纳米微球和生命科学及医学领域中的应用。
2.
A polyazoester initiator was used to synthesize polystyrene/polyaerylamide (PSt/PAM) block polymers by its consecutive decomposition in styrene(St) and aerylamide(AM).
采用聚偶氮酯引发剂,合成了聚苯乙烯/聚丙烯酰胺嵌段聚合物(PSt/PAM)。
3.
SROPE technology is compounding high content of effective oil into thermoplastic polymer with add the third element of the block polymer,to produce the masterbatch whose oil be coming out for a long time without rapid bleeding out,it could add the specific efficacy for the polymer.
SROPE技术是用加入第三组分嵌段聚合物的方法使大剂量的功能性油剂混入热塑性聚合物中,制成具有油剂缓慢析出性能的母粒,可赋予聚合物一定的功能性。
补充资料：1,1'-[亚甲基双(氧代)]双[2-氯-乙烷]与硫化钠的聚合物
CAS：51023-47-3
分子式：(C5H10Cl2O2·W99)x
中文名称：1,1'-[亚甲基双(氧代)]双[2-氯-乙烷]与硫化钠的聚合物
硫化钠、1,1'-[亚甲基双(氧代)]双[2-氯乙烷]的聚合物
英文名称：Ethane, 1,1'-[methylenebis(oxy)]bis[2-chloro-, polymer with sodium sulfide
1,1'-[Methylenebis(oxy)]bis[2-chloroethane), sodium polysulfide polymer
1,1'-[methylenebis(oxy)]bis[2-chloro-ethan polymer with sodium sulfide
分子式：(C5H10Cl2O2·W99)x
中文名称：1,1'-[亚甲基双(氧代)]双[2-氯-乙烷]与硫化钠的聚合物
硫化钠、1,1'-[亚甲基双(氧代)]双[2-氯乙烷]的聚合物
英文名称：Ethane, 1,1'-[methylenebis(oxy)]bis[2-chloro-, polymer with sodium sulfide
1,1'-[Methylenebis(oxy)]bis[2-chloroethane), sodium polysulfide polymer
1,1'-[methylenebis(oxy)]bis[2-chloro-ethan polymer with sodium sulfide
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条