1) flexible tube sheet
柔性管板
1.
In calculation of flexible tube sheet,it is a tedious work to determine the largest non-supported circle and supported area using conventional geometrical technique.
柔性管板计算中,用普通的几何方法确定最大无支撑圆和支承面积是一项很繁琐的工作,且误差较大,容易遗漏,特别是有拉撑的平板和管板。
3) flexible plate
柔性板
1.
In this paper an active vibration control system of 2D flexible plate is presented by using piezoelectric sensors and actuators.
本文采用压电陶瓷作为传感器和执行器,对二维柔性板的振动抑制进行了实验研究。
2.
The rigid-flexible dynamics of a flexible plate considering thermal effect was investigated.
研究考虑热效应的柔性板的刚-柔耦合动力学规律。
3.
The finite element method was used for the system discretization and the coupling dy- namic equations of flexible plate attached to a central rigid body were obtained by using Jourdain s veloc.
以由中心刚体与柔性板构成的刚柔耦合系统为对象,研究了零次近似模型和耦合模型在动力学方程以及实际计算中表现出来的差异。
4) flexible substrate
柔性基板
1.
The flexible organic light-emitting devices (FOLED) is an important development direction in the next generation of display technology while it can be fabricated on the flexible substrate for flexible display application.
可弯曲式(柔性)有机电致发光器件由于可将发光器件制作在柔性基板上,实现显示器的可弯曲性,成为下一代显示技术发展的重要方向。
2.
Based on the geometrical optics model,the optical characteristics of our FOLED with a structure of top reflecting mirror/organic material/bottom reflecting mirror/flexible substrate were discussed.
设计了结构为上反射镜/有机层/下反射镜/柔性基板的可弯曲式有机电致发光器件(FOLED)。
5) flexible cover board
柔性盖板
1.
This paper analyzes the shielding efficiency principle of modular from structural design angle, introduces several kinds of commonly used measures to improve shielding efficiency of modular,and especially explain structure making up and shielding mechanism of a new type of cover board named flexible cover board.
从结构设计角度出发对屏蔽盒屏蔽效能原理进行分析,介绍了常用的提高屏蔽盒屏蔽效能的措施,重点阐述了一种新型屏蔽盖板即柔性盖板的结构组成及屏蔽机理,最后通过屏蔽效能对比试验将其与单层铝制盖板进行比较,从而验证其屏蔽效能。
6) flexible bending
柔性卷板
1.
3-D surface flexible bending is a novel sheet metal forming technology.
三维曲面柔性卷板成形是一种新颖的板材柔性成形技术。
补充资料：薄管板废热锅炉
分子式：
CAS号：
性质：是一种双层薄管板型锅炉，其结构特点是上管板用普通厚度板作为固定点，下管板为柔性结构。为增加薄管板的强度，可用一特殊结构的栅板支承薄管板。壳程水进口处有遮板，使水进入后先向下流，然后经下管板再向上流动。下封头内裂解气进口处设有气体分布器，由两层不同角度的折流板组成。用于乙烯装置高温裂解气的热回收。
CAS号：
性质：是一种双层薄管板型锅炉，其结构特点是上管板用普通厚度板作为固定点，下管板为柔性结构。为增加薄管板的强度，可用一特殊结构的栅板支承薄管板。壳程水进口处有遮板，使水进入后先向下流，然后经下管板再向上流动。下封头内裂解气进口处设有气体分布器，由两层不同角度的折流板组成。用于乙烯装置高温裂解气的热回收。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条