1) sintered porous surface tubing
烧结型多孔管
1.
Fouling characteristics of sintered porous surface tubing;
烧结型多孔管的污垢特性
2) sintering surface porous tube
烧结型表面多孔管
3) new sintered cellular brick
新型烧结多孔砖
1.
The application of new sintered cellular brick in masonry-concrete buildings;
新型烧结多孔砖在砖混结构房屋中的应用
4) fired perforated bricks
烧结多孔砖
1.
Evaluation on the uncertainty in measuring the compressive strength of fired perforated bricks;
烧结多孔砖抗压强度测量结果的不确定度评定
2.
Application of alkali-slag cementation materials in rapid determination of fired perforated bricks compressive strength
碱矿渣胶凝材料在快速测定烧结多孔砖抗压强度中的应用
3.
The principle and method of boiling process in rapid determination of fired perforated bricks compressive strength is introduced .
介绍沸煮法快速测定烧结多孔砖抗压强度的原理和方法。
5) fired perforated brick
烧结多孔砖
1.
Research on thermal simulation of fired perforated brick by ANSYS
基于ANSYS的烧结多孔砖热模拟研究
2.
Through the shear strength test of the model of three fired perforated bricks under different axial compression ratio,the failure form and theory under shear-compression combined loading are studied.
通过90个烧结多孔砖砌体三砖模型在不同轴压比下的抗剪试验,初步探明了多孔砖砌体在剪压复合受力下的破坏形态及破坏机理。
3.
The energy-saving load-bearing fired perforated brick is tried, which is made from the Yellow River silt as main raw material and fly ash and so on.
对以黄河淤泥为主要原料掺入适量粉煤灰等外加剂的节能承重烧结多孔砖进行试验研究 ,其结果表明 ,该产品容重低、强度高、导热系数小、隔热、外观质量好 ,且工艺流程简单 ,易于控制 ,其主要性能指标符合 GB135 4 4 -2 0 0 0《烧结多孔砖》要求 。
6) porous sintered blanks
多孔烧结体
补充资料：多孔层开管柱
分子式：
CAS号：
性质：在开管柱内壁上用适当的方法沉积上一层多孔性物质(如硅藻土、硅烷化硅胶、分子筛等)，即为多孔层开管柱。多孔性物质可做吸附剂用，也可做为载体再涂固定液使用。多孔性物质作为载体用的又称涂载体开管柱(support-coated open tubular column)。多孔层厚度约为0.1mm。与涂壁开管柱相比，它的内表面大，柱容量大，固定液流失减少，柱寿命增加。
CAS号：
性质：在开管柱内壁上用适当的方法沉积上一层多孔性物质(如硅藻土、硅烷化硅胶、分子筛等)，即为多孔层开管柱。多孔性物质可做吸附剂用，也可做为载体再涂固定液使用。多孔性物质作为载体用的又称涂载体开管柱(support-coated open tubular column)。多孔层厚度约为0.1mm。与涂壁开管柱相比，它的内表面大，柱容量大，固定液流失减少，柱寿命增加。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条